KelTec PF-9

The KelTec PF-9 is a 9 mm caliber, recoil operated, locked breech, double action only, semi-automatic pistol based on (and sharing many parts with) KelTec's earlier P11 and P3AT models.

History KelTec first announced the PF9 on February 9, 2006, and the new pistol was released into the market in the fall of 2006.

KelTec claims the PF9 is the flattest and lightest 9 mm pistol ever mass-produced. The PF9 was discontinued following the introduction of the P15.https://blog.keltecweapons.com/press/keltec-introduces-p15-striker-fire-pistol-lightest-and-thinnest-of-its-kind KELTEC™ INTRODUCES P15™ STRIKER-FIRE PISTOL, LIGHTEST AND THINNEST OF ITS KINDhttps://www.keltecweapons.com/discontinued/pf9/ Kel Tec PF9 in discontinued list

Design The PF9 is manufactured in Cocoa, Florida, by KelTec CNC Industries.

It was designed as a concealment and backup weapon for law enforcement and for civilian concealed carry.

Featuring extensive use of computer numerical control (CNC) manufacturing techniques, its six main components consist of the barrel, slide, frame, grip, trigger group, and magazine.

Frame The frame is made of DuPont ST-8018 polymer and holds the steel, 7-round, single-column magazine.PF-9 Owner's manual, Kel-Tec CNC Industries

The grip is available in a variety of colors, while the slide is available in blued, Parkerized, ceramic (Cerakote), and hard chromed finishes.

Barrel The barrel is manufactured of SAE/AISI 4140 steel hardened to 48 RHC, and the slide is constructed of the same steel.

Trigger The trigger group consists of a solid machined 7075-T56 aluminum billet. A transfer bar system connects the hammer and trigger.

Safety system A firing pin block safety is incorporated which prevents accidental discharge if the pistol is dropped.

The long double-action-only trigger pull provides an additional safety feature. The pistol includes a slide hold-open feature which locks the slide in its rearmost position after the last round is fired.

Sights The sights consist of a fixed front blade and a windage-adjustable notched rear sight. Three white dots highlight the sights for optimum visibility in low-light conditions, and this gun includes an accessory rail for mounting lights and lasers.

Accessories The PF9 is shipped with an extended magazine floorplate, an Allen wrench for adjusting the rear sight, and an owner's manual.

Comparisons The PF9 uses many parts originally designed for KelTec's P11 and P3AT models and is a compromise between those pistols.

From the P11, the PF9 uses a slightly modified barrel, trigger, ejector, and front sight. The P3AT parts used in the PF9 include the extractor and various springs.

KelTec PF-9

Bron en licentie