The Petropavlovsk class, sometimes referred to as the Poltava class, was a group of three pre-dreadnought battleships built for the Imperial Russian Navy during the 1890s. They were transferred to the Pacific Squadron shortly after their completion in 1899–1900 and were based at Port Arthur before the start of the Russo-Japanese War of 1904–1905. All three ships participated in the Battle of Port Arthur on the second day of the war. sank two months after the war began after striking one or more mines laid by the Japanese. Her two sister ships, and , took part in the Battle of the Yellow Sea in August 1904 and were sunk or scuttled during the final stages of the siege of Port Arthur in early 1905.
Poltava was salvaged after the Japanese captured Port Arthur and incorporated into the Imperial Japanese Navy. The ship, renamed Tango in Japanese service, participated in the Battle of Tsingtao in late 1914, during World War I. She was sold back to the Russians in 1916 and renamed Chesma as her original name was in use by another battleship. The ship became the flagship of the Russian Arctic Flotilla in 1917, and her crew supported the Bolsheviks later that year. Chesma was seized by the British in early 1918 when they intervened in the Russian Civil War, abandoned by them when they withdrew and scrapped by the Soviets in 1924.
Background and description
Tsar Alexander III's ambitious building programme of 1882 called for construction of 16 battleships in 20 years for the Baltic Fleet. By 1890 the program was behind schedule and the director of the Naval Ministry, Vice Admiral , proposed that six first-class and four second-class battleships be built together with some armored coast-defense ships to make up the numbers required. The Petropavlovsk-class ships were designed as first-class battleships to meet his requirement for a heavily armored ship that displaced and had a speed of , a maximum draught of and a range of with good seakeeping qualities.
The design began as an enlarged and improved version of the battleship , but with her main armament of four guns mounted in lighter barbettes rather than the heavy gun turrets of the older ship. Based on experience with , in which the casemate-mounted secondary armament could often not be worked in rough weather, the Naval Technical Committee (NTC) adopted the layout of the American s with the secondary armament mounted in turrets on the upper deck. Use of the lighter barbette mounting allowed for a flush-deck hull, which gave the design high freeboard. It was approved in January 1891 by the NTC with a displacement of and a full-length waterline armor belt.
The design was intended to have a maximum speed of 17 knots using forced draft, but model testing of the hull showed that it could only reach . Rather than delay construction by redesigning the hull, the navy accepted the slower speed. Development of the quick-firing (QF) gun meant that an upper belt of armor was necessary and the weight required was gained by shortening the waterline armor belt, which left the ships' ends protected only by the sloping armor deck. Other changes included the replacement of the barbettes with turrets of the same type as used in the battleship and the substitution of QF guns for the original guns. This last change saved enough weight to permit four more six-inch guns to be added.
The Petropavlovsk-class ships were long overall, had a beam of and a draught of . Designed to displace , they were overweight and actually displaced . The ships were the first flush-decked battleships built for the navy. They had a partial double bottom, and the hull was divided by 10 watertight transverse bulkheads; a centerline bulkhead divided the machinery spaces. The upper part of the hull between the main and upper decks curved inwards (tumblehome). The Petropavlovsks had a designed metacentric height of and were good seagoing ships. Their crew consisted of 26–27 officers and 605–625 enlisted men; Petropavlovsk had a crew of 750 when serving as a flagship.
The ships were powered by two vertical triple-expansion steam engines, each driving one propeller, using steam generated by 14 cylindrical boilers at a working pressure of . Unlike her sisters, Sevastopol had 16 boilers. The engines were rated at and designed to reach a top speed of 16 knots. Poltava and Petropavlovsk used engines and boilers imported from Britain and slightly exceeded their specifications; during their sea trials, the ships reached maximum speeds of from , respectively. Sevastopol, using domestically built machinery, only reached a speed of from , despite the extra boilers. The Naval Ministry chose not to exercise the penalty provisions of the contract for failing to attain the design speed because it had specified the machinery to be used. The Petropavlovsks carried a maximum of of coal which allowed them to steam for at a speed of .
Armament The main armament of the Petropavlovsk class consisted of four 40-caliber 12-inch guns mounted in twin-gun turrets fore and aft of the superstructure. They used hydraulic power for loading and traversing, but the ammunition hoists were electrically powered. Designed to fire one shell every 90 seconds, the rate of fire of the guns in service proved to be one round every three minutes. The structure of the turrets proved to be too weak to withstand extra-strength charges and had to be reinforced. The guns could elevate to a maximum of +15° and traverse 270°; each was provided with 58 rounds. They fired a shell at a muzzle velocity of . This gave them a range of at an elevation of 10°.
The secondary armament of the ships consisted of a dozen 45-caliber QF Canet Model 1892 six-inch guns. Eight of these were mounted in four twin-gun turrets on the upper deck and the remaining four guns were on pedestal mounts in unarmored embrasures in the sides of the hull, one deck below and between the turrets. Electric motors traversed the turrets and worked the ammunition hoists, but the guns were elevated manually. They had a 135° arc of fire, and the guns could elevate to a maximum of +15° and depress to −5°. The rate of fire of the turret-mounted guns was generally only about half that (two to three rounds per minute) of the pedestal-mounted guns. The motors and mechanism of the ammunition hoists were troublesome and sometimes reduced the rate of fire down to one round per minute. The guns in the hull could traverse 100° and each six-inch gun was provided with 200 rounds. Their muzzle velocity of gave their shells a maximum range of .
Smaller guns were carried for defense against torpedo boats. These included a dozen quick-firing (QF) Hotchkiss guns in hull embrasures and on the superstructure. They fired a shell at a muzzle velocity of . Twenty-eight smaller Maxim QF guns were positioned in hull embrasures, on the superstructure and in the fighting tops. They fired a shell at a muzzle velocity of .
The Petropavlovsk-class ships carried four torpedo tubes, all above water, mounted on the broadside and two broadside underwater tubes. The forward 15-inch tubes were near the forward main gun turret and were unprotected by any armor; aft, the 15-inch tubes were protected by the upper armor belt. The underwater tubes were protected underneath the armor deck, forward of the forward 12-inch magazine. Each ship also carried 50 mines to be laid to protect its anchorage in remote areas.
The ships were fitted with Liuzhol stadiametric rangefinders that used the angle between two vertical points on an enemy ship, usually the waterline and the crow's nest, to estimate the range. The gunnery officer consulted his references to get the range and calculated the proper elevation and deflection required to hit the target. He transmitted his commands via a Geisler electro-mechanical fire-control transmission system to each gun or turret.
Protection The Russian armor-plate industry had not yet mastered the process for forming thick steel plates so the armor for these ships was ordered from companies in Germany and the United States. Even they could not produce enough of the latest types of armor plate in the quantities required for all three ships. Petropavlovsk had ordinary nickel steel, while Sevastopol used Harvey armor and Poltava was fitted with the latest Krupp armor. The thicknesses of the armor plates varied in an attempt to equalize their effectiveness. In Petropavlovsk, the maximum thickness of the waterline armor belt over the machinery spaces was , which reduced to 12 inches abreast the magazines and tapered to a thickness of 8 inches at its bottom edge. In the other two ships, it was thick over the machinery spaces, over the magazines and at its lower edge. The belt covered of the ships' length and was high, of which the upper was intended to be above the waterline. It terminated in transverse bulkheads thick fore and aft, leaving the ends of the ships unprotected. Above the waterline belt was an upper strake of armor that ran between the turret bases, seven and a half feet high. The ends of the upper belt were closed off by five-inch angled transverse bulkheads that connected the ends of the upper belt to the turret support tubes.
The armor of the main-gun turrets and their supporting tubes was 10 inches thick (Krupp armor in Poltava, nickel steel in the other two) with roofs thick. The turrets of the secondary armament had 5-inch sides with roofs. The six-inch guns in the hull embrasures were unprotected. The sides of the conning tower were 9 inches thick while the armor deck in the central citadel was 2 inches thick. Outside the area covered by the belt armor, the flat portion of the deck was thick, while the sloped portion was thick.
Ships + Construction data Ship Namesake Builder Laid down Launched Entered service Fate (Петропавловск) Battle of Petropavlovsk Galernyi Island Shipyard, Saint Petersburg 19 May 1892 9 November 1894 1899 Sank after striking a mine, 13 April 1904 (Полтава) Battle of Poltava New Admiralty Shipyard, Saint Petersburg 6 November 1894 Scrapped, 1924 (Севастополь) Siege of Sevastopol Galernyi Island Shipyard, Saint Petersburg 1 June 1895 1900 Scuttled, 2 January 1905
Service
Petropavlovsk was the first of the sisters to enter service; she departed Kronstadt on 17 October 1899 and reached Port Arthur on 10 May 1900. Upon her arrival, she became flagship of the Pacific Squadron commander, Vice Admiral Nikolai Skrydlov. The ship supported international efforts to suppress the Boxer Rebellion in mid-1900. Poltava and Sevastopol departed for Port Arthur on 15 October 1900 and arrived on 12 and 13 April 1901 respectively. Petropavlovsk was the flagship of Vice Admiral Oskar Stark at the beginning of the Russo-Japanese War in February 1904.
During the Battle of Port Arthur on the second day of the war, Poltava was hit twice in the aft hull, Petropavlovsk was hit three times in the bow and Sevastopol was hit once. Between them, the sisters had two men killed and seven wounded and were not significantly damaged. None of them made any hits on Japanese ships. The Naval Ministry relieved Stark, and he was replaced by Vice Admiral Stepan Makarov who assumed command on 7 March. On 13 April, Petropavlovsk and Poltava sortied to support Russian cruisers and destroyers engaging their Japanese counterparts, but they headed back to Port Arthur to join the rest of the Pacific Squadron when the main Japanese battlefleet appeared. They ran into a newly laid minefield en route and Petropavlovsk struck at least one of the mines, sinking in less than two minutes. Casualties included Admiral Makarov and his guest, the war artist Vasily Vereshchagin, 26 other officers and 652 enlisted men. Only 7 officers and 73 crewmen were rescued.