In geometry and topology, Conway polyhedron notation, invented by John Horton Conway and promoted by George W. Hart, is used to describe polyhedra based on a seed polyhedron modified by various prefix operations.
Conway and Hart extended the idea of using operators, like truncation as defined by Kepler, to build related polyhedra of the same symmetry. For example, represents a truncated cube, and , parsed as , is (topologically) a truncated cuboctahedron. The simplest operator dual swaps vertex and face elements; e.g., a dual cube is an octahedron: . Applied in a series, these operators allow many higher order polyhedra to be generated. Conway defined the operators (ambo), (bevel), (dual), (expand), (gyro), (join), (kis), (meta), (ortho), (snub), and (truncate), while Hart added (reflect) and (propellor). Later implementations named further operators, sometimes referred to as "extended" operators. Conway's basic operations are sufficient to generate the Archimedean and Catalan solids from the Platonic solids. Some basic operations can be made as composites of others: for instance, ambo applied twice is the expand operation (), while a truncation after ambo produces bevel ().
Polyhedra can be studied topologically, in terms of how their vertices, edges, and faces connect together, or geometrically, in terms of the placement of those elements in space. Different implementations of these operators may create polyhedra that are geometrically different but topologically equivalent. These topologically equivalent polyhedra can be thought of as one of many embeddings of a polyhedral graph on the sphere. Unless otherwise specified, in this article (and in the literature on Conway operators in general) topology is the primary concern. Polyhedra with genus 0 (i.e. topologically equivalent to a sphere) are often put into canonical form to avoid ambiguity.
Operators In Conway's notation, operations on polyhedra are applied like functions, from right to left. For example, a cuboctahedron is an ambo cube, (See fourth row in table, "a = ambo".) i.e. , and a truncated cuboctahedron is . Repeated application of an operator can be denoted with an exponent: j2 = o. In general, Conway operators are not commutative.
Individual operators can be visualized in terms of fundamental domains (or chambers), as below. Each right triangle is a fundamental domain. Each white chamber is a rotated version of the others, and so is each colored chamber. For achiral operators, the colored chambers are a reflection of the white chambers, and all are transitive. In group terms, achiral operators correspond to dihedral groups where n is the number of sides of a face, while chiral operators correspond to cyclic groups lacking the reflective symmetry of the dihedral groups. Achiral and chiral operators are also called local symmetry-preserving operations (LSP) and local operations that preserve orientation-preserving symmetries (LOPSP), respectively. LSPs should be understood as local operations that preserve symmetry, not operations that preserve local symmetry. Again, these are symmetries in a topological sense, not a geometric sense: the exact angles and edge lengths may differ. +Fundamental domains of faces with sides3 (Triangle)4 (Square)5 (Pentagon)6 (Hexagon)The fundamental domains for polyhedron groups. The groups are for achiral polyhedra, and for chiral polyhedra. Hart introduced the reflection operator r, that gives the mirror image of the polyhedron. This is not strictly a LOPSP, since it does not preserve orientation: it reverses it, by exchanging white and red chambers. r has no effect on achiral polyhedra aside from orientation, and rr = S returns the original polyhedron. An overline can be used to indicate the other chiral form of an operator: = rsr.
An operation is irreducible if it cannot be expressed as a composition of operators aside from d and r. The majority of Conway's original operators are irreducible: the exceptions are e, b, o, and m.
Matrix representation x xd dx dxd
The relationship between the number of vertices, edges, and faces of the seed and the polyhedron created by the operations listed in this article can be expressed as a matrix . When x is the operator, are the vertices, edges, and faces of the seed (respectively), and are the vertices, edges, and faces of the result, then
.
The matrix for the composition of two operators is just the product of the matrixes for the two operators. Distinct operators may have the same matrix, for example, p and l. The edge count of the result is an integer multiple d of that of the seed: this is called the inflation rate, or the edge factor.
The simplest operators, the identity operator S and the dual operator d, have simple matrix forms: , Two dual operators cancel out; dd = S, and the square of is the identity matrix. When applied to other operators, the dual operator corresponds to horizontal and vertical reflections of the matrix. Operators can be grouped into groups of four (or fewer if some forms are the same) by identifying the operators x, xd (operator of dual), dx (dual of operator), and dxd (conjugate of operator). In this article, only the matrix for x is given, since the others are simple reflections.
Number of operators The number of LSPs for each inflation rate is starting with inflation rate 1. However, not all LSPs necessarily produce a polyhedron whose edges and vertices form a 3-connected graph, and as a consequence of Steinitz's theorem do not necessarily produce a convex polyhedron from a convex seed. The number of 3-connected LSPs for each inflation rate is . The number of 3-connected LOPSPs (chiral) for each inflation rate is .
Original operations Strictly, seed (S), needle (n), and zip (z) were not included by Conway, but they are related to original Conway operations by duality so are included here.
From here on, operations are visualized on cube seeds, drawn on the surface of that cube. Blue faces cross edges of the seed, and pink faces lie over vertices of the seed. There is some flexibility in the exact placement of vertices, especially with chiral operators.
+Original Conway operators Edge factor Matrix x xd dx dxd Notes 1 Seed: S Dual: d Seed: dd = S Dual replaces each face with a vertex, and each vertex with a face. 2 Join: j Ambo: a Join creates quadrilateral faces. Ambo creates degree-4 vertices, and is also called rectification, or the medial graph in graph theory. 3 Kis: k Needle: n Zip: z Truncate: t Kis raises a pyramid on each face, and is also called akisation, Kleetope, cumulation, accretion, or pyramid-augmentation. Truncate cuts off the polyhedron at its vertices but leaves a portion of the original edges. Zip is also called bitruncation. 4 Ortho: o = jj Expand: e = aa 5 Gyro: g gd = rgr sd = rsr Snub: s Chiral operators. See Snub (geometry). Contrary to Hart, gd is not the same as g: it is its chiral pair. 6 Meta: m = kj Bevel: b = ta
Seeds Any polyhedron can serve as a seed, as long as the operations can be executed on it. Common seeds have been assigned a letter. The Platonic solids are represented by the first letter of their name (Tetrahedron, Octahedron, Cube, Icosahedron, Dodecahedron); the prisms (Pn) for n-gonal forms; antiprisms (An); cupolae (Un); anticupolae (Vn); and pyramids (Yn). Any Johnson solid can be referenced as Jn, for n=1..92.
All of the five Platonic solids can be generated from prismatic generators with zero to two operators:
Triangular pyramid: Y3 (A tetrahedron is a special pyramid) T = Y3 O = aT (ambo tetrahedron) C = jT (join tetrahedron) I = sT (snub tetrahedron) D = gT (gyro tetrahedron) Triangular antiprism: A3 (An octahedron is a special antiprism) O = A3 C = dA3 Square prism: P4 (A cube is a special prism) C = P4 Pentagonal antiprism: A5 I = k5A5 (A special gyroelongated dipyramid) D = t5dA5 (A special truncated trapezohedron)
The regular Euclidean tilings can also be used as seeds: Q = Quadrille = Square tiling H = Hextille = Hexagonal tiling = dΔ Δ = Deltille = Triangular tiling = dH
Extended operations These are operations created after Conway's original set. Note that many more operations exist than have been named; just because an operation is not here does not mean it does not exist (or is not an LSP or LOPSP). In addition, only irreducible operators are included in this list; many others can be created by composing operators together.
+Irreducible extended operators Edge factor Matrix x xd dx dxd Notes 4 Chamfer: c cd = du dc = ud Subdivide: u Chamfer is the join-form of l. See Chamfer (geometry). 5 Propeller: p dp = pd dpd = p Chiral operators. The propeller operator was developed by George Hart. 5 Loft: l ld dl dld6 Quinto: q qd dq dqd6Join-lace: L0L0ddL0dL0d See below for explanation of join notation.7 Lace: L Ld dL dLd7 Stake: K Kd dK dKd 7 Whirl: w wd = dv vd = dw Volute: v Chiral operators.8Join-kis-kis: Sometimes named J. See below for explanation of join notation. The non-join-form, kk, is not irreducible.10 Cross: X Xd dX dXd
Indexed extended operations A number of operators can be grouped together by some criteria, or have their behavior modified by an index. These are written as an operator with a subscript: xn.
Augmentation Augmentation operations retain original edges. They may be applied to any independent subset of faces, or may be converted into a join-form by removing the original edges. Conway notation supports an optional index to these operators: 0 for the join-form, or 3 or higher for how many sides affected faces have. For example, k4Y4=O: taking a square-based pyramid and gluing another pyramid to the square base gives an octahedron. Augmentation operatorxklLK(kk)Corresponding join-form operatorx0k0 = jl0 = cL0K0 = jk(kk)0AugmentationPyramid Prism Antiprism
The truncate operator t also has an index form tn, indicating that only vertices of a certain degree are truncated. It is equivalent to dknd.
Some of the extended operators can be created in special cases with kn and tn operators. For example, a chamfered cube, cC, can be constructed as t4daC, as a rhombic dodecahedron, daC or jC, with its degree-4 vertices truncated. A lofted cube, lC is the same as t4kC. A quinto-dodecahedron, qD can be constructed as t5daaD or t5deD or t5oD, a deltoidal hexecontahedron, deD or oD, with its degree-5 vertices truncated.
Meta/Bevel Meta adds vertices at the center and along the edges, while bevel adds faces at the center, seed vertices, and along the edges. The index is how many vertices or faces are added along the edges. Meta (in its non-indexed form) is also called cantitruncation or omnitruncation. Note that 0 here does not mean the same as for augmentation operations: it means zero vertices (or faces) are added along the edges. +Meta/Bevel operators n Edge factor Matrix x xd dx dxd 0 3 k = m0 nz = b0 t 1 6 m = m1 = kj b = b1 = ta 29 m2m2db2b2d 312 m3m3db3b3d n 3n+3 mnmndbnbnd
Medial Medial is like meta, except it does not add edges from the center to each seed vertex. The index 1 form is identical to Conway's ortho and expand operators: expand is also called cantellation and expansion. Note that o and e have their own indexed forms, described below. Also note that some implementations start indexing at 0 instead of 1. +Medial operators n Edgefactor Matrix x xd dx dxd 1 4 M1 = o = jj e = aa 27 Medial: M = M2MddMdMd n3n+1 MnMnddMndMnd
Goldberg-Coxeter