LCD manufacturing is the process of making liquid crystal display (LCD) panels. It involves using glass and silicon substrates. Photolithography is used to pattern the substrates, and liquid crystal materials are added. In the case of a color TFT LCD, color filters are patterned in layers to make red, green, and blue pixels.
Liquid crystal displays are manufactured in cleanrooms, borrowing techniques from semiconductor device manufacturing.
Process A class of photolithography known as display lithography is used to etch patterns into substrates.
LCD manufacturing shares some of the process with OLED manufacturing.
The process flow involves multiple separate components that are joined together: a process for making a thin-film transistor (TFT) backplane, a process for making color filters, and a liquid crystal cell process.
Large-scale chemical vapor deposition (CVD) systems have been used in the manufacture of LCDs.
Once LCD panels are manufactured, they can be measured for color quality and panel uniformity using characterization equipment.
TFT backplane process TFT backplanes are made using photolithography techniques, which involve using photomasks. The photomask(s) are used to create TFTs on a substrate, which involves formation of a gate layer, source/drain layer formation, and contact-hole formation.
The TFT backplane process involves patterning of indium tin oxide (ITO), which is a transparent and electrically conductive material.
Conventional LCDs use a back-channel etched (BCE) TFT display pixel structure.
Liquid crystal cell process The cell process involves layer alignment, sealant formation, and depositing liquid crystal. The panels are then bonded and cut into individual displays.
A technique that can be used is one drop fill (ODF).
UV photocuring equipment can be used for bonding LCD panels.
Modules An LCD module (LCM) is a ready-to-use LCD with a backlight. Thus, a factory that makes LCD modules does not necessarily make LCDs, it may only assemble them into the modules.
An LCD panel is attached to a driver board using anisotropic conductive film.
Generations
LCDs are manufactured using large sheets of glass whose size has increased over time. Several displays are manufactured at the same time, and then cut from the sheet of glass, also known as the mother glass or LCD glass substrate. The increase in size allows more displays or larger displays to be made, just like with increasing wafer sizes in semiconductor manufacturing. The glass sizes are as follows: Generation Length(mm) Height(mm) Year ofintroduction References GEN 1200–300200–4001990 GEN 2370470 GEN 35506501996–1998 GEN 3.56007201996 GEN 46808802000–2002 GEN 4.57309202000–2004Armorex Taiwan Central Glass Company , Retrieved May 20, 2015. GEN 511001250–13002002–2004 GEN 5.5 1300 1500 GEN 615001800–18502002–2004 GEN 7 1870 2200 2003 Samsung: SAMSUNG Electronics Announces 7th-Generation TFT LCD Glass Substrate , Press release March 27, 2003, Visited August 2, 2010. GEN 7.5 1950 2250 GEN 8 2160 2460 GEN 8.5 2200 2500 2007–2016 GEN 8.6 2250 2600 2016 GEN 8.7 2290 2620 2026 GEN 10 2880 3130 2009 GEN 10.5 2940 3370 2018
In 2004, Sharp started manufacturing panels using the 6th-generation glass size, which is 1.8 meters by 1.5 meters.
Until Gen 8, manufacturers would not agree on a single mother glass size and as a result, different manufacturers would use slightly different glass sizes for the same generation. Some manufacturers have adopted Gen 8.6 mother glass sheets which are only slightly larger than Gen 8.5, allowing for more 50- and 58-inch LCDs to be made per mother glass, specially 58-inch LCDs, in which case 6 can be produced on a Gen 8.6 mother glass vs only 3 on a Gen 8.5 mother glass, significantly reducing waste. The thickness of the mother glass also increases with each generation, so larger mother glass sizes are better suited for larger displays.
2019-2025
Companies Companies that have made or sold LCD panels include: Sharp Corporation Japan Display AUO Corporation
Companies that have produced FPD lithography equipment include Canon and Nikon.
LCD glass substrates are made by companies such as AGC Inc., Corning Inc., and Nippon Electric Glass.
Display lithography equipment include the H803T and H1003T from Canon. Display Technologies, Inc. is a defunct joint venture that manufactured LCD panels.
Materials Optically clear adhesives are used to bond display components in the manufacturing process.
See also Liquid crystal on silicon
References