Aluminium–magnesium alloys (AlMg) are aluminium alloys that are mainly made of aluminium and contain magnesium as the main alloy element. Most standardised alloys also contain small additives of manganese (AlMg(Mn)). Pure AlMg alloys and the AlMg(Mn) alloys belong to the medium-strength, natural (not hardened by heat treatment) alloys. Other AlMg alloys are aluminium–magnesium–copper alloys (AlMgCu) and aluminium–magnesium–silicon alloys (AlMgSi, 6000 series).
Applications and processing Discovery of aluminium–magnesium alloys dates back to late 19th century. AlMg alloys are among the most important aluminium alloys for construction materials. They get cold dwell transform, i.e., by rolling and forging and are easily weldable at Mg levels of at least 3%. AlMg is rarely processed through extrusion presses, as subsequent strength changes in extrusion profiles must be avoided. The majority of AlMg alloys are processed into rolled products as well as pipes, rods, wires and free-form or drop-forged parts. Parts are also processed into extrusion profiles with simple cross-sections.Friedrich Ostermann: Anwendungstechnologie Aluminium. 3. Auflage. Springer, 2014, , S. 102 f.
Due to the good corrosion resistance and high strength at low temperatures, AlMg is used in shipbuilding, in the construction of chemical apparatus and pipelines, and for refrigeration technology and automobiles. The good weldability is crucial for use in the aircraft construction, there also with additions of scandium and zirconium for better weldability.Friedrich Ostermann: Anwendungstechnologie Aluminium. 3. Auflage. Springer, 2014, , S. 103.
Solubility of magnesium and phases The solubility of magnesium is very high in aluminium and reaches a maximum at 450 °C with 14% to 17% depending on the literature reference. At 34.5%, there is a Eutectic with Al8Mg5 (sometimes referred to as Al3Mg2), an intermetallic phase (-phase). The solubility of Mg decreases sharply with falling temperature, i.e., at 100 °C it is still 2%, at room temperature 0.2%.
The elimination of the -phase occurs with pure AlMg alloys after a four-stage process. With technically used alloys with other alloying elements and impurities, the process is much more complicated:Ostermann, S. 104.
First of all, clusters form, in the case of aluminium as GP zones. These are local accumulations of magnesium atoms in the aluminium grid, which do not yet form their own phase and do not have a regular arrangement. Formation of the -phase. Their crystals have the same spatial orientation as those of the aluminium mixing crystal. Formation of the semi-coherent -phase. It is only partially oriented towards the lattice of the Al mixed crystal. Formation of incoherent -phase. It has no spatial orientation with the Al mixed crystal.
In the case of technical alloys, the excretion differs from this for the following reasons:Ostermann, S. 105.
Low diffusion of magnesium in aluminium For the formation of GP zones and -phase, a high oversaturation of 7% Mg and more is required, which is not achieved in most all>oys. In AlMg4.5Mn0.7, no GP zones were used even after prolonged glow at temperatures up to 250 °C or -phase found, although after just a few days -phase is present. Dislocations are not sufficient terms for the formation of -phase, -phase or -phase. The reason is the small volume difference between these phases and the matrix.
Structures
The diffusion of magnesium in aluminium is very low. The reason is the high size difference between the radius of the aluminium atoms and that of the magnesium atoms ().Ostermann, S. 105. Therefore, after watering, only part of the magnesium is removed from the mixed crystal, while most of it is present as an oversaturated solution in aluminium. Even with prolonged annealing treatment, this condition cannot be eliminated.
Excess magnesium is excreted mainly at the grain boundaries as well as on dispersion particles in the grain. The speed of the process depends on the Mg content and the temperature and increases with both. At the grain boundaries, so-called plaques are initially excreted, thin plates that are not connected, i.e. do not yet form a continuous layer around the grain. At 70 °C, they form after 3 months, at 100 °C after 3 days and at 150 °C after one to nine hours. If further time passes at elevated temperature, the plaques grow together to form a contiguous film. This has a negative effect on corrosion resistance, but can be dissolved by heat treatment. Annealing at 420 °C for one hour followed by slow cooling of 20 °C/h or starting annealing at 200 °C to 240 °C is suitable. The plaques of the -phase transform into numerous small particles, referred to in the specialist literature as "bead line-like". They no longer form a coherent film.Ostermann, S. 105. Composition of standardised varieties The compositions of some standardised varieties are contained in the following table. Proportions of alloying elements in mass percent. Of the available varieties, there are fine gradations of Mg and Mn levels. Mn-free are very rare. Standard alloys are AlMg3Mn, AlMg4.5Mn0.7, as well as for bodywork AlMg4.5Mn0.4. Magnesium levels of up to 5% and manganese content up to 1% are used for wrought alloys.Ostermann: Anwendungstechnologie Aluminium, Anhang.Aluminium-Taschenbuch, Anhang.
Mg contents up to 10% are also possible for cast alloys; however, contents of 7% and more are considered heavypourable.Andreas Bühring-Polaczek, Walter Michaeli, Günter Spur (Hrsg.): Handbuch Urformen, Hanser, 2014, S. 67. NumericallyabbreviationsSiFeCuMnMgCrZnEN AW-5005 –0.30.70.20.20.5–1.10.10.25EN AW-5052AlMg2.50.250.40.10.12.2–2.80.15–0.350.1EN AW-5083AlMg4.5Mn0.70.40.40.10.4–1.04.0–4.90.05–0.250.25EN AW-5454AlMg3Mn0.250.40.10.5–1.02.4–3.00.05–0.20.25
5000 series 5000 series are alloyed with magnesium. 5083 alloy has the highest strength of non-heat-treated alloys. Most 5000 series alloys include manganese as well. +5000 series aluminium alloy nominal composition (% weight) and applicationsAlloyAl contentsAlloying elementsUses and refs5005 & 565799.2Mg 0.8Sheet, plate, rod501099.3Mg 0.5; Mn 0.2;501994.7Mg 5.0; Mn 0.25;502494.5Mg 4.6; Mn 0.6; Zr 0.1; Sc 0.2Extrusions, aerospace502693.9Mg 4.5; Mn 1; Si 0.9; Fe 0.4; Cu 0.3505098.6Mg 1.4Universal5052 & 565297.2Mg 2.5; Cr 0.25Universal, aerospace, marine505694.8Mg 5.0; Mn 0.12; Cr 0.12Foil, rod, rivets505993.5Mg 5.0; Mn 0.8; Zn 0.6; Zr 0.12rocket cryogenic tanks508394.8Mg 4.4; Mn 0.7; Cr 0.15Universal, welding, marine508695.4Mg 4.0; Mn 0.4; Cr 0.15Universal, welding, marine5154 & 525496.2Mg 3.5; Cr 0.25;Universal, rivets518295.2Mg 4.5; Mn 0.35;Sheet525297.5Mg 2.5;Sheet535694.6Mg 5.0; Mn 0.12; Cr 0.12; Ti 0.13Rod, MIG wire545496.4Mg 2.7; Mn 0.8; Cr 0.12Universal545694Mg 5.1; Mn 0.8; Cr 0.12Universal545798.7Mg 1.0; Mn 0.2; Cu 0.1Sheet, automobile trimASM Handbook, Volume 5: Surface Engineering C.M. Cotell, J.A. Sprague, and F.A. Smidt, Jr., editors, p. 490 DOI: 10.1361/asmhba0001281555799.1Mg 0.6; Mn 0.2; Cu 0.1Sheet, automobile trim575495.8Mg 3.1; Mn 0.5; Cr 0.3Sheet, Rod
Corrosion Aluminium-magnesium alloys are considered to be very corrosion-resistant, making them suitable for marine applications, but this is only true if the -phase exists as a non-contiguous phase. Alloys with Mg contents below 3% are therefore always corrosion-resistant, with higher contents, appropriate heat treatment must ensure that this phase is not present as a continuous film at the grain boundaries.Ostermann: Anwendungstechnologie Aluminium, S. 103
The -phase and the -phase are very base compared to aluminium and have an anodic characteristic. AlMg therefore tends to intergranular corrosion ifOstermann: Anwendungstechnologie Aluminium, S. 106
The -phase is excreted as a continuous film at the grain boundaries and at the same time the material is in an aggressive environment.
Alloys in states susceptible to intergranular corrosion are annealed at temperatures of 200 °C to 250 °C with slow cooling (heterogeneisation annealing). This changes the -phase film in globulite -phase and the material is resistant to intergranular corrosion.Aluminium-Taschenbuch, S. 136.
Mechanical properties
Table NumericalOstermann: Anwendungstechnologie Aluminium, AnhangabbreviationsConditionElongation limit [N/mm2]Tensile strength [N/mm2]Elongation at break [%]Brinell hardnessVickers hardnessBending strength [N/mm2]Young's modulus[N/mm2]5005AlMg1(B) O (soft annealed) HX2 (cold-solidified, 1/4-hard) HX4 (cold solidified, 1/2-hard) 45 125 145 120 140 160 27 13 12 30 40 45 46 50 55 80695005052AlMg2.5 O HX2 HX4 90 175 200 195 225 250 25 15 14 50 65 70 50 70 75 105 110 12070,0005083AlMg4.5Mn0.7 O HX2 HX4 145 240 275 300 330 360 23 17 16 70 90 100 75 95 105 14071,0005454AlMg3Mn O HX2 HX4 110 205 235 235 265 290 25 15 14 60 75 80 60 80 85 115 120 13070,500
Strengths and elongation at break in tensile test The strength is increased by alloying magnesium. At low Mg levels, the increase in strength is relatively strong with higher levels, it is getting weaker and weaker. However, magnesium increases strength very efficiently compared to other elements; per % Mg, so it is stronger than with alternative elements. Even with medium Mg content, the increase in strength by alloying manganese is higher than by additional magnesium, which is also one reason why most AlMg alloys still contain manganese. As a reason for the high increase in strength of magnesium, the high binding energy of vacancies at Mg atoms. These spaces are then no longer available as free spaces. However, these are favourable for plastic deformation.Ostermann: Anwendungstechnologie Aluminium, S. 106.
The yield strength increases linearly with increasing Mg content from about 45 N/mm2 at 1% Mg to about 120 N/mm2 at 4% Mg. The tensile strength also increases linearly, but with a steeper gradient. With 1% Mg it is about 60 N/mm2, with 4% Mg 240 N/mm2.Ostermann: Anwendungstechnologie Aluminium, 3. Auflage, S. 106–108. (Verwiesen wird auf folgende Studien: Falkenstein, H.-P., Gruhl, W., Scharf, G.: Beitrag zum Umformen von Aluminiumwerkstoffen. Metall. 37, 1197–1202 (1983); sowie: Yanagawa, M., Ohie, S., Koga, S., Hino, M.: Controlling factors of ductility in Al-Mg alloys. Kobelco Technol. Rev. 16, 25–30 (1993)) There are different statements for the elongation at break : Research on alloys based on the purest shows an increasing elongation at break from about 20% elongation at 1% to 30% at 5% Mg Elongation at break: First it drops sharply from 38% elongation and 1% Mg to 34% elongation and about 1.8% Mg, reaches a minimum at 3% Mg with only 32% elongation and then rises again to about 35% Elongation at 5% Mg.Aluminium-Taschenbuch, 16. Auflage, S. 135. (mit Verweis auf Scharf, G; Einfluss der chemischen Zusammensetzung von AlMgSi-Knetwerkstoffen. Aluminium 58 (1982)7, S. 391/397)George E. Totten, D. Scott MacKenzie: Handbook of Aluminum Band 1: Physical Metallurgy and Processes. Marcel Dekker, Yew York, Basel. 2003, 1296 S. 165.
The flow curves for AlMg show the behaviour typical of metallic materials of increasing the flow voltage with the true elongation or forming degree. For all alloys, the increase is relatively strong at low elongations and lower at higher elongations. However, the curves for higher alloy varieties are always above the low-dried. For example, with a true elongation of 0.2, AlMg0.5 has a flow voltage of about 100 N/mm2, AlMg one of 150 N/mm2, AlMg3 of 230 N/mm2 and AlMg4.5Mn0.4 of about 300 N/mm2. The higher the alloy content and the greater the elongation, the greater the resulting PLC effect and the Lüders effect.Ostermann: Anwendungstechnologie Aluminium, S. 107.
Influence of grain size