In computer science, multiway number partitioning is the problem of partitioning a multiset of numbers into a fixed number of subsets, such that the sums of the subsets are as similar as possible. It was first presented by Ronald Graham in 1969 in the context of the identical-machines scheduling problem. The problem is parametrized by a positive integer k, and called k-way number partitioning. The input to the problem is a multiset S of numbers (usually integers), whose sum is k*T.
The associated decision problem is to decide whether S can be partitioned into k subsets such that the sum of each subset is exactly T. There is also an optimization problem: find a partition of S into k subsets, such that the k sums are "as near as possible". The exact optimization objective can be defined in several ways:
Minimize the difference between the largest sum and the smallest sum. This objective is common in papers about multiway number partitioning, as well as papers originating from physics applications. Minimize the largest sum. This objective is equivalent to one objective for Identical-machines scheduling. There are k identical processors, and each number in S represents the time required to complete a single-processor job. The goal is to partition the jobs among the processors such that the makespan (the finish time of the last job) is minimized. Maximize the smallest sum. This objective corresponds to the application of fair item allocation, particularly the maximin share. It also appears in voting manipulation problems, and in sequencing of maintenance actions for modular gas turbine aircraft engines. Suppose there are some k engines, which must be kept working for as long as possible. An engine needs a certain critical part in order to operate. There is a set S of parts, each of which has a different lifetime. The goal is to assign the parts to the engines, such that the shortest engine lifetime is as large as possible. These three objective functions are equivalent when k=2, but they are all different when k≥3.
All these problems are NP-hard, but there are various algorithms that solve it efficiently in many cases.
Some closely-related problems are:
The partition problem - a special case of multiway number partitioning in which the number of subsets is 2. The 3-partition problem - a different and harder problem, in which the number of subsets is not considered a fixed parameter, but is determined by the input (the number of sets is the number of integers divided by 3). The bin packing problem - a dual problem in which the total sum in each subset is bounded, but k is flexible; the goal is to find a partition with the smallest possible k. The optimization objectives are closely related: the optimal number of d-sized bins is at most k, iff the optimal size of a largest subset in a k-partition is at most d. The uniform-machines scheduling problem - a more general problem in which different processors may have different speeds.
Approximation algorithms There are various algorithms that obtain a guaranteed approximation of the optimal solution in polynomial time. There are different approximation algorithms for different objectives.
Minimizing the largest sum The approximation ratio in this context is the largest sum in the solution returned by the algorithm, divided by the largest sum in the optimal solution (the ratio is larger than 1). Most algorithms below were developed for identical-machines scheduling.
Greedy number partitioning (also called the Largest Processing Time in the scheduling literature) loops over the numbers, and puts each number in the set whose current sum is smallest. If the numbers are not sorted, then the runtime is and the approximation ratio is at most . Sorting the numbers increases the runtime to and improves the approximation ratio to 7/6 when k=2, and in general. If the numbers are distributed uniformly in [0,1], then the approximation ratio is at most almost surely, and in expectation. Largest Differencing Method (also called the Karmarkar-Karp algorithm ) sorts the numbers in descending order and repeatedly replaces numbers by their differences. The runtime complexity is . In the worst case, its approximation ratio is similar – at most 7/6 for k =2, and at most in general. However, in the average case it performs much better than the greedy algorithm: for k =2, when numbers are distributed uniformly in [0,1], its approximation ratio is at most in expectation. It also performs better in simulation experiments. The Multifit algorithm uses binary search combined with an algorithm for bin packing . In the worst case, its makespan is at most 8/7 for k =2, and at most 13/11 in general.
Several polynomial-time approximation schemes (PTAS) have been developed:
Graham presented the following algorithm. For any integer r>0, choose the r largest numbers in S and partition them optimally. Then allocate the remaining numbers arbitrarily. This algorithm has approximation ratio and it runs in time . Sahni presented a PTAS that attains (1+ε)OPT in time . It is an FPTAS if k is fixed. For k=2, the run-time improves to . The algorithm uses a technique called interval partitioning. Hochbaum and Shmoys presented the following algorithms, which work even when k is part of the input. For any r >0, an algorithm with approximation ratio at most (6/5+2−r ) in time . For any r >0, an algorithm with approximation ratio at most (7/6+2−r ) in time . For any ε>0, an algorithm with approximation ratio at most (1+ε) in time . This is a PTAS.
Maximizing the smallest sum The approximation ratio in this context is the smallest sum in the solution returned by the algorithm, divided by the smallest sum in the optimal solution (the ratio is less than 1).
For greedy number partitioning, if the numbers are not sorted then the worst-case approximation ratio is 1/k. Sorting the numbers increases the approximation ratio to 5/6 when k=2, and in general, and it is tight. Woeginger presented a PTAS that attains an approximation factor of in time , where a huge constant that is exponential in the required approximation factor ε. The algorithm uses Lenstra's algorithm for integer linear programming. The FPTAS of Sahni works for this objective too.
Maximizing the sum of products Jin studies a problem in which the goal is to maximize the sum, over every set i in 1,...,k, of the product of numbers in set i. In a more general variant, each set i may have a weight wi, and the goal is to maximize the weighted sum of products. This problem has an exact solution that runs in time O(n2).
A PTAS for general objective functions Let Ci (for i between 1 and k) be the sum of subset i in a given partition. Instead of minimizing the objective function max(Ci), one can minimize the objective function max(f(Ci)), where f is any fixed function. Similarly, one can minimize the objective function sum(f(Ci)), or maximize min(f(Ci)), or maximize sum(f(Ci)). Alon, Azar, Woeginger and Yadid presented general PTAS-s (generalizing the PTAS-s of Sanhi, Hochbaum and Shmoys, and Woeginger) for these four problems. Their algorithm works for any f which satisfies the following two conditions:
A strong continuity condition called Condition F*: for every ε>0 there exists δ>0 such that, if |y-x|<δx, then |f(y)-f(x)|<εf(x). Convexity (for the minimization problems) or concavity (for the maximization problems).
The runtime of their PTAS-s is linear in n (the number of inputs), but exponential in the approximation precision. The PTAS for minimizing sum(f(Ci)) is based on some combinatorial observations:
Let L := the average sum in a single subset (1/k the sum of all inputs). If some input x is at least L, then there is an optimal partition in which one part contains only x. This follows from the convexity of f. Therefore, the input can be pre-processes by assigning each such input to a unique subset. After this preprocessing, one can assume that all inputs are smaller than L. There is an optimal partition in which all subsets sums are strictly betweel L/2 and 2L (L/2 < Ci < 2L for all i in 1,...,k). Particularly, the partition minimizing the sum of squares Ci2, among all optimal partitions, satisfies these inequalities. The PTAS uses an input rounding technique. Given the input sequence S = (v1,...,vn) and a positive integer d, the rounded sequence S#(d) is defined as follows:
For any vj > L/d, the sequence S#(d) contains an input vj# which is vj rounded up to the next integer multiple of L/d2. Note that vj ≤ vj# < vj +L/d2, and L/d2 < vj /d, so vj # < (d+1)vj /d. In addition, the sequence S#(d) contains some inputs equal to L/d. The number of these inputs is determined such that the sum of all these new inputs equals the sum of all inputs in S#(d) that are at most L/d, rounded up to the next integer multiple of L/d (for example, if the sum of all "short" inputs in S is 51.3L/d, then 52 new L/d inputs are added to S#(d)). In S#(d), all inputs are integer multiples of L/d2. Moreover, the above two observations hold for S#(d) too:
Let L# be the average sum in a single subset (1/k the sum of all inputs in S#(d)). By construction, L# is at least L. Since L itself is an integer multiple of L/d2, the rounding-up of inputs smaller than L cannot make them larger than L. Therefore, all inputs in S#(d) are smaller than L, and hence smaller than L#. There is an optimal partition of S#(d) in which all subset sums are strictly between L#/2 and 2L#. Therefore, all subsets contain at most 2d elements (since all inputs in S#(d) are at least L/d). Based on these observations, all inputs in S#(d) are of the form hL/d2, where h is an integer in the range . Therefore, the input can be represented as an integer vector , where is the number of hL/d2 inputs in S#(d). Moreover, each subset can be represented as an integer vector , where is the number of hL/d2 inputs in the subset. The subset sum is then . Denote by , the set of vectors with . Since the sum of elements in such a vector is at most 2d, the total number of these elements is smaller than , so .
There are two different ways to find an optimal solution to S#(d). One way uses dynamic programming: its run-time is a polynomial whose exponent depends on d. The other way uses Lenstra's algorithm for integer linear programming.
Dynamic programming solution Define as the optimal (minimum) value of the objective function sum(f(Ci)), when the input vector is and it has to be partitioned into k subsets, among all partitions in which all subset sums are strictly between L#/2 and 2L#.
It can be solved by the following recurrence relation:
- since their objective sum is empty. if - since all inputs must be assigned to a single subset, so its sum is . otherwise - since we do not consider optimal solutions outside this range. for all : we check all options for the k-th subset, and combine it with an optimal partition of the remainder into k-1 subsets. For each k and n, the recurrence relation requires to check at most vectors. The total number of vectors n to check is at most , where n is the original number of inputs. Therefore, the run-time of the dynamic programming algorithm is . It is linear in n for any fixed d.
Integer linear programming solution For each vector t in T, introduce a variable xt denoting the number of subsets with this configuration. Minimizing sum(f(Ci)) can be attained by the solving the following ILP:
Minimize subject to (the total number of subsets) and (the total vector of inputs) and .
The number of variables is at most , and the number of equations is - both are constants independent of n, k. Therefore, Lenstra's algorithm can be used. Its run-time is exponential in the dimension (), but polynomial in the binary representation of the coefficients, which are in O(log(n)). Constructing the ILP itself takes time O(n).
Converting the solution from the rounded to the original instance