This is a list of publishedThis list generally excludes draft versions. International Organization for Standardization (ISO) standards and other deliverables.ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards". For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.
The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.
ISO 10000 – ISO 10999 ISO/IEC TR 10000 Information technology – Framework and taxonomy of International Standardized Profiles ISO/IEC TR 10000-1:1998 Part 1: General principles and documentation framework ISO/IEC TR 10000-2:1998 Part 2: Principles and Taxonomy for OSI Profiles ISO/IEC TR 10000-3:1998 Part 3: Principles and Taxonomy for Open System Environment Profiles ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring ISO 10005:2005 Quality management systems – Guidelines for quality plans ISO 10006:2003 Quality management systems – Guidelines for quality management in projects ISO 10007:2017 Quality management systems – Guidelines for configuration management ISO 10008:2013 Quality management – Customer satisfaction – Guidelines for business-to-consumer electronic commerce transactions ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment ISO/TR 10013:2001 Guidelines for quality management system documentation ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits ISO 10015:1999 Quality management – Guidelines for training ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000 ISO 10018:2012 Quality management – Guidelines on people involvement and competence ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services ISO/IEC 10021 Information technology – Message Handling Systems (MHS) ISO/IEC 10022:1996 Information technology – Open Systems Interconnection – Physical Service Definition ISO/IEC 10026 Information technology – Open Systems Interconnection – Distributed Transaction Processing ISO/IEC 10026-1:1998 Part 1: OSI TP Model ISO/IEC 10026-2:1998 Part 2: OSI TP Service ISO/IEC 10026-3:1998 Part 3: Protocol specification ISO/IEC 10026-4:1995 Protocol Implementation Conformance Statement (PICS) proforma ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routing Information Exchange Protocol for use in conjunction with ISO/IEC 8878 ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element ISO/IEC 10035-2:1995 Protocol Implementation Conformance Statement (PICS) proforma ISO/IEC 10036:1996 Information technology - Font information interchange - Procedures for registration of font-related identifiers ISO/IEC 10040:1998 Information technology – Open Systems Interconnection – Systems management overview ISO 10052:2004 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method ISO 10055:1996 Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components ISO 10075 Ergonomic principles related to mental workload ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance ISO 10079 Medical suction equipment ISO 10079-1:2015 Part 1: Electrically powered suction equipment ISO 10079-2:2014 Part 2: Manually powered suction equipment ISO 10079-3:2014 Part 3: Suction equipment powered from a vacuum or positive pressure gas source ISO/IEC 10089:1991 Information technology – 130 mm rewritable optical disk cartridge for information interchange ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data interchange ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once recording format ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systemsThe exact wording of this title varies between parts. This is the wording of the most recently published part. ISO 10110-1:2006 Part 1: General ISO 10110-2:1996 Part 2: Material imperfections – Stress birefringence ISO 10110-3:1996 Part 3: Material imperfections – Bubbles and inclusions ISO 10110-4:1997 Part 4: Material imperfections – Inhomogeneity and striae ISO 10110-5:2015 Part 5: Surface form tolerances ISO 10110-6:2015 Part 6: Centring tolerances ISO 10110-7:2017 Part 7: Surface imperfections ISO 10110-8:2010 Part 8: Surface texture; roughness and waviness ISO 10110-9:2016 Part 9: Surface treatment and coating ISO 10110-10:2004 Part 10: Table representing data of optical elements and cemented assemblies ISO 10110-11:2016 Part 11: Non-toleranced data ISO 10110-12:2007 Part 12: Aspheric surfaces ISO 10110-14:2007 Part 14: Wavefront deformation tolerance ISO 10110-17:2004 Part 17: Laser irradiation damage threshold ISO 10110-19:2015 Part 19: General description of surfaces and components ISO 10112:1991 Damping materials – Graphical presentation of the complex modulus ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher ISO/IEC 10118 Information technology – Security techniques – Hash-functions ISO/IEC 10118-1:2016 Part 1: General ISO/IEC 10118-2:2010 Part 2: Hash-functions using an n-bit block cipher ISO/IEC 10118-3:2004 Part 3: Dedicated hash-functions ISO/IEC 10118-4:1998 Part 4: Hash-functions using modular arithmetic ISO 10132:1993 Textiles – Textured filament yarn – Definitions ISO 10135:2007 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD) ISO/IEC 10149:1995 Information technology - Data interchange on read-only 120 mm optical data disks (CD-ROM) ISO 10159:2011 Health informatics – Messages and communication – Web access reference manifest ISO 10160:2015 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification ISO 10161-1:2014 Part 1: Protocol specification ISO 10161-2:2014 Part 2: Protocol implementation conformance statement (PICS) proforma ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management ISO/IEC 10164-1:1993 Object Management Function ISO/IEC 10164-2:1993 State Management Function ISO/IEC 10164-3:1993 Attributes for representing relationships ISO/IEC 10164-4:1992 Alarm reporting function ISO/IEC 10164-5:1993 Event Report Management Function ISO/IEC 10164-6:1993 Log control function ISO/IEC 10164-7:1992 Security alarm reporting function ISO/IEC 10164-8:1993 Security audit trail function ISO/IEC 10164-9:1995 Objects and attributes for access control ISO/IEC 10164-10:1995 Usage metering function for accounting purposes ISO/IEC 10164-11:1994 Metric objects and attributes ISO/IEC 10164-12:1994 Test Management Function ISO/IEC 10164-13:1995 Summarization Function ISO/IEC 10164-14:1996 Confidence and diagnostic test categories ISO/IEC 10164-15:2002 Scheduling function ISO/IEC 10164-16:1997 Management knowledge management function ISO/IEC 10164-17:1996 Change over function ISO/IEC 10164-18:1997 Software management function ISO/IEC 10164-19:1998 Management domain and management policy management function ISO/IEC 10164-20:1999 Time management function ISO/IEC 10164-21:1998 Command sequencer for Systems Managenment ISO/IEC 10164-22:2000 Response time monitoring ISO/IEC 10165 Information technology – Open Systems Interconnection – Structure of management information ISO/IEC 10165-1:1993 Management Information Model ISO/IEC 10165-2:1992 Definition of management information ISO/IEC 10165-4:1992 Part 4: Guidelines for the definition of managed objects ISO/IEC 10165-5:1994 Generic management information ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management ISO/IEC 10165-7:1996 General relationship model ISO/IEC 10165-8:2000 Managed objects for supporting upper layers ISO/IEC 10165-9:2000 Systems management application layer managed objects ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR) ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures ISO/IEC 10166-2:1991 Part 2: Protocol specification ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA) ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures ISO/IEC 10175-2:1996 Part 2: Protocol specification ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures ISO/IEC TR 10176:2003 Information technology - Guidelines for the preparation of programming language standards ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL) ISO/IEC 10180:1995 Information technology - Processing languages - Standard Page Description Language (SPDL) ISO/IEC 10181 Information technology - Open Systems Interconnection - Security frameworks for open systems ISO/IEC 10181-1:1996 Overview ISO/IEC 10181-2:1996 Authentication framework ISO/IEC 10181-3:1996 Access control framework ISO/IEC 10181-4:1997 Non-repudiation framework ISO/IEC 10181-5:1996 Confidentiality framework ISO/IEC 10181-6:1996 Integrity framework ISO/IEC 10181-7:1996 Security audit and alarms framework