SS Roosevelt was an American steamship of the early 20th century. She was designed and constructed specifically for Robert Peary′s polar exploration expeditions, and she supported the 1908 expedition in which he claimed to have discovered the North Pole.
After her career with Peary, Roosevelt saw commercial use as a tug. She also operated as a United States Bureau of Fisheries supply ship and served as a United States Navy patrol vessel during World War I.
Design and construction
United States Navy Commander Robert Peary designed Roosevelt specifically for operations in support of his Arctic exploration expeditions. His design attempted to incorporate the best features of previous polar exploration ships with innovations that would give her first-of-their-kind capabilities.Grigore, p. 14.
Peary designed the ship along the same lines as the Norwegian explorer Fridtjof Nansen's schooner Fram, with the capability both to push through large floating ice packs and squeeze through and between ice fields. Roosevelt was a schooner with an ice-strengthened flexible wooden hull sheathed in steel and braced by a unique system of trusses. The wooden construction of her hull gave it both strength and the flexibility to bend rather than break when ice struck it or pressed against it, and her hull planking was assembled through a lamination process that gave her hull greater strength than a single piece of wood could provide. Her hull was thick in places and was egg-shaped, a design that would allow her to rise and ride above sea ice that pushed against her below the waterline – almost popping up out of the ice – rather than be crushed by it.Grigore, pp. 14, 15 Her bow and stern both had steel plating; the bow plating extended from her keel to above the waterline and aft, while the stern plating also extended from the keel to above the waterline and extended forward. Between the bow and stern plating, a layer of steel of an inch (0.95 cm) thick and tall extended along the waterline.
Previous Arctic exploration ships had relied on sails for their primary propulsion, with engine power secondary, but Roosevelt became the first such ship to reverse that principle. She had three masts, all of which could carry sails for auxiliary propulsion, but relied for propulsion primarily on a powerful compound steam engine – equipped with a special system that allowed it to generate for brief periods if she encountered particularly massive ice concentrations – that drove a single, large propeller in diameter on a -diameter shaft designed to generate powerful thrust that could push her through drift ice. She had a sharply raked stem intended to increase her ramming and cutting power against sea ice, and a short length at the waterline and narrow beam to give her increased maneuverability when steering between ice packs. Her rudder was of a special design that gave her the maximum possible steering capacity while exposing the rudder as little as possible to ice damage. Her design minimized auxiliary structures, both to allow the stowage of sufficient fuel, supplies, and provisions for lengthy stays in the Arctic and to give her a relatively shallow draft so that she could operate in shallow waters and close to shore.
Roosevelt was the first ship ever built in the Western Hemisphere for Arctic exploration. Her construction cost was US$150,000 and was funded in part by a US$50,000 gift by George Crocker, the youngest son of banker Charles Crocker. The McKay and Dix Shipyard laid her keel at Bucksport, Maine, on 19 October 1904. Sponsored by Peary's wife, Josephine Peary,Grigore, p. 15. who broke a bottle of champagne encased in ice across Roosevelts bow, the ship was launched on 23 March 1905 and christened SS Roosevelt in honor of President Theodore Roosevelt, who had openly supported Peary and played an instrumental role in arranging for the U.S. Navy to grant Peary a leave of absence so that he could continue his Arctic explorations. After fitting out, she was delivered to her owner, the Peary Arctic Club, in July 1905. She drew considerable attention because of her innovative design and at the time of her construction she was considered the strongest wooden vessel ever built.
Operational history Peary expeditions
On 16 July 1905, Roosevelt, captained by Robert Bartlett, set out from New York City on what was called the Roosevelt Expedition, sponsored by the Peary Arctic Club, with Peary and his party aboard. Roosevelt withstood a fire, rudder damage, and encounters with fog and icebergs and proceeded northward to Cape Sheridan in the north of Ellesmere Island. Made fast to the ice on 5 September 1905, she remained there through the winter of 1905–1906, becoming the second-largest ship ever to spend a winter in the Arctic. Peary and his party disembarked in January 1906 to head northward across the ice, and set a record for Farthest North, reaching a latitude of 87 degrees 6 minutes North before turning back. Roosevelt broke out of the ice on 4 July 1906, prior to the return of the expedition. Carried south, she crashed against an ice foot a few days later, losing propeller blades, her rudder, and her sternpost. On 30 July 1906, Peary and his party returned to her after a six-month absence, and on 24 August 1906 Roosevelt broke free and turned southward. By mid-September 1906 she was far enough south to assure her escape from the ice before the winter freeze and in December 1906 she arrived at New York City.
On 8 July 1908, Roosevelt, again captained by Robert Bartlett, cleared New York Harbor and began a voyage north via Baffin Bay, Smith Sound, Kane Basin, Kennedy Channel, Hall Basin, and Robeson Channel into the Arctic Ocean. In early September 1908 she again made fast to the ice at Cape Sheridan to wait out the winter of 1908–1909 as Peary and his party tried for the North Pole. Departing Cape Sheridan in February 1909, Peary determined that he had reached the North Pole on 6 April 1909, and he and his party returned to Roosevelt. In July 1909, Roosevelt began the return voyage. In mid-August 1909 she left Smith Sound, and in September 1909 she rounded Cape Breton and Newfoundland and steamed to New York City. She arrived in New York flying the "North Pole flag" — a then-standard 46-star United States flag with a diagonal white band sewed to it from upper left to lower right and the words "NORTH POLE" in black capital letters in the white band"Peary Polar Expedition Flags (U.S.)", CRW Flags, April 4, 2015 Accessed May 19, 2022 — the first ship ever to enter a harbor flying the flag. Not long afterward, she participated in a naval parade on the Hudson River as part of the 1909 Hudson-Fulton Anniversary Celebration.
After his return to New York, Peary proposed that the Peary Arctic Club and the National Geographic Society jointly undertake an expedition to the Antarctic, with the Peary Arctic Club contributing Roosevelt to the expedition. However, Roosevelt required expensive repairs because of ice damage she had suffered, and the Antarctic expedition never took place.Grigore, pp. 15–16.
John Arbuckle In August or November 1910, the Peary Arctic Club sold Roosevelt to Brooklyn, New York, tea, coffee, and sugar merchant John Arbuckle for US$37,500. Arbuckle operated a fleet of vessels for salvaging wrecked ships and towing. Arbuckle had Roosevelt modified significantly, removing her foremast and transforming her into an oceangoing wrecking tug that successfully recovered several large steamships, including , as well as other wrecked ships. After Arbuckle died in 1912, Roosevelt was sold to H. E. J. McDermott and appeared as a "fishing vessel" in shipping lists of 1912, 1913, and 1914,Grigore, p. 16. but apparently she remained inactive with the rest of Arbuckle's salvage fleet near the Brooklyn Bridge in New York City for three years.
On 3 March 1915, The New York Times reported that John W. Sullivan and Company had purchased Roosevelt. That company made improvements to the ship which may have included replacing her coal-burning machinery with oil-fired propulsion, although sources differ on whether this conversion took place before or after the company sold her.
U.S. Bureau of Fisheries On 21 April 1910, the United States Congress assigned the responsibility for the management and harvest of northern fur seals, foxes, and other fur-bearing animals in the Pribilof Islands in the Bering Sea, as well as for the care, education, and welfare of the Aleut communities in the islands, to the United States Bureau of Fisheries (BOF). Since then, the BOF had chartered commercial vessels to transport passengers and cargo to and from the Pribilof Islands. By 1915, the BOF had decided that a more cost-effective means of serving the islands would be to own and operate its own "Pribilof tender", a dedicated cargo liner responsible for transportation to and from the Pribilofs. The BOF estimated that constructing a new ship capable of meeting its needs would cost at least US$100,000. Exploring cheaper alternatives, the BOF decided the idle Roosevelt would fulfill its requirements and purchased her from John W. Sullivan and Company in 1915 for US$40,000 to serve as its first "Pribilof tender".
On 19 July 1915,Grigore, p. 22. Roosevelt departed New York City bound for Norfolk, Virginia, to pick up coal for the Pribilofs, but during the voyage to Norfolk she suffered significant mechanical failures that required repairs at the Norfolk Navy Yard in Portsmouth, Virginia. A thorough inspection of her at the shipyard revealed that she needed additional repairs and a general overhaul, replacement of the foremast Arbuckle had removed, and the installation of a more efficient three-bladed propeller; this may also have been when the need to convert her from burning coal to burning fuel oil was identified. At the end of the summer of 1916, the demand for steel for use in World War I created a delay in forging Roosevelts new tail shaft, delaying her departure from Norfolk for several more months. While she was lying idle, the eighth annual Convention of the Southern Commercial Congress took place in Norfolk in December 1916, and she and the BOF steamer participated in it, exhibiting several fishery-related items and devices.
Ultimately, the total cost of the ship and her repairs came to US$72,000, but it was still a significant saving compared to the estimated cost of constructing a new vessel. With her repairs finally complete, Roosevelt departed Norfolk on 23 January 1917, bound for Seattle, Washington, but endured further delays en route, first impeded by an international incident which detained her for over a month at Guantánamo Bay, Cuba, followed by yet another delay of three weeks for repairs at Balboa in the Panama Canal Zone. She finally arrived at Seattle on 23 April 1917, carrying supplies for the United States Navy and the United States Lighthouse Service. On 4 July 1917, a dedication ceremony took place in Seattle to mark the opening of the Government Locks, which connected Puget Sound with the Lake Washington Ship Canal and Lake Washington, and Roosevelt – leading a flotilla of hundreds of boats that included the newly built BOF boat USFS Auklet – became the first large ocean-going vessel to enter the canal and the first such ship to enter Lake Washington.