The class comprised two protected cruisers of the French Navy built in the early 1890s; the two ships were and . They were ordered as part of a naval construction program directed at France's rivals, Italy and Germany, particularly after Italy made progress in modernizing its own fleet. The plan was also intended to remedy a deficiency in cruisers that had been revealed during training exercises in the 1880s. As such, the -class cruisers were intended to operate as fleet scouts and in the French colonial empire. The ships were armed with a main battery of four guns supported by ten guns and they had a top speed of .
served briefly with the Northern Squadron in 1898 and 1899 before being placed in reserve; thereafter, she and served the entirety of their active careers abroad. was sent to the Pacific in 1899 after being completed, and she remained there through 1905 to protect French interests. was sent on a brief stint to French Madagascar in 1901 through at least 1902, before returning to France at some point before 1905. Early that year, she was sent to the Pacific to replace her sister ship, remaining there through at least 1908. No records of her activities thereafter survive. That year, was converted into a training ship for the Gunnery School, though she was sold for scrap in 1910. was discarded the following year.
Background
In the late 1880s, the Italian (Royal Navy) accelerated construction of ships for its fleet and reorganized its most modern ironclad battleships—the and es—into a fast squadron suitable for offensive operations. These developments provoked a strong response in the French press. The Budget Committee in the French Chamber of Deputies began to press for a "two-power standard" in 1888, which would see the French fleet enlarged to equal the combined Italian and German fleets, then France's two main rivals on the continent. This initially came to nothing, as the supporters of the doctrine called for a fleet largely based on squadrons of torpedo boats to defend the French coasts rather than an expensive fleet of ironclads. This view had significant support in the Chamber of Deputies.
The next year, a war scare with Italy led to further outcry to strengthen the fleet. To compound matters, the visit of a German squadron of four ironclads to Italy confirmed French concerns of a combined Italo-German fleet that would dramatically outnumber their own. Training exercises held in France that year demonstrated that the slower French fleet would be unable to prevent the faster Italian squadron from bombarding the French coast at will, in part because it lacked enough cruisers (and doctrine to use them) to scout for the enemy ships. To correct the weaknesses of the French fleet, on 22 November 1890, the Superior Council authorized a new construction program directed not at simple parity with the Italian and German fleets, but numerical superiority. In addition to twenty-four new battleships, a total of seventy cruisers were to be built for use in home waters and overseas in the French colonial empire. The class were ordered to as part of the program, and they were intended to operate in France's overseas colonies.
Design
To meet the requirements for new cruisers for overseas deployments, the French naval minister, Édouard Barbey, issued a request on 4 November 1890 for design proposals similar to the older and es. Barbey laid out his requirements for the (Council of Works), which included a maximum displacement of , a speed of at least at natural draft, and a cruising radius of at with a normal load of coal (and up to with a maximum load). Armament was set at four guns and ten guns, and the ship was to be protected by deck consisting of a pair of layers. The new ships were to incorporate a barque sailing rig for extended voyages overseas. The made several alterations, including increasing the speed and cruising radius, which necessitated a displacement of around . Barbey approved their recommendations and requested proposals from several shipyards on 3 February 1891.
Five yards submitted proposals, and on 31 July the examined the submissions. The selected a design from the shipyard , which became the , but they also chose a submission from the naval engineer Joseph Louis Tissier for further development as well. Tissier had noted that the specifications issued by Barbey were broadly similar to the earlier s, so he based his design on those vessels. He widened the hull slightly and added a layer of wood to the copper sheathing to protect the vessel during lengthy deployments overseas, where shipyard facilities were not readily available. The requested that Tissier replace the Lagrafel et d'Allest water-tube boilers with Belleville boilers, which would improve the arrangement of the boiler rooms.
In his revised design, which he had completed by January 1893, Tissier altered the arrangement of the main battery to more closely resemble the design; he had originally placed the guns in sponsons that were widely spaced, but the preferred the closer arrangement that had adopted. On 24 January, Barbey forwarded the design to the , which approved it on 7 March. Final approval from the naval command was given on 21 July; the first ship, , was to be allocated to the 1893 budget, but delays forced her contract to be moved to the 1894 budget.
General characteristics and machinery
The ships of the class differed slightly in dimensions. Both were long at the waterline, but was long overall while was overall. They had a beam of , which increased to at the sponsons for and , respectively. had an average draft of , while s draft was . displaced , while displaced . suffered from stability problems and had to have ballast added, accounting for her greater displacement. was instead affected by severe vibration at speeds greater than ; both ships were poorly ventilated.
Like most French warships of the period, the -class cruisers' hulls had a pronounced ram bow, tumblehome shape, and a short forecastle deck. Below the waterline, the hulls were covered in a layer of wood and copper sheathing to protect them from biofouling on long voyages overseas. The ships had a minimal superstructure, consisting primarily of a small conning tower and a bridge. They were originally to have been fitted with heavy military masts, but during construction, these were replaced with lighter pole masts with spotting tops for observation and signaling purposes. The ships were fitted with four searchlights. Their crew numbered 399 officers and enlisted men.
The ships' propulsion system consisted of a pair of vertical triple-expansion steam engines driving two screw propellers. Steam was provided by sixteen coal-burning Belleville-type water-tube boilers that were ducted into two funnels. Their machinery was rated to produce normally, and up to using forced draft, for a top speed of . In their initial sea trials, was reached for a speed of and made for . Coal storage amounted to , which allowed them to steam for at a speed of .
Armament and armor
The -class vessels were armed with a main battery of four Modèle 1893 45-caliber guns. They were placed in pairs in a single large sponson amidships, two guns per broadside. They were supplied with a variety of shells, including solid, cast iron projectiles, and explosive armor-piercing (AP) and semi-armor-piercing (SAP) shells that weighed and , respectively. The guns fired with a muzzle velocity of .
The main battery was supported by a secondary battery of ten 45-cal. Modèle 1891 guns ( carried the newer M1893 variant), which were carried in a variety of mounts. Two guns fitted with gun shields were placed side-by-side in pivot mounts on the upper deck, four more were in the upper deck forward in casemates. Another pair of guns were in sponsons further aft, and the remaining pair were in pivot mounts on the upper deck aft. The guns fired cast iron and AP shells with a muzzle velocity of .
For close-range defense against torpedo boats, they carried ten 40-cal. M1885 Hotchkiss guns and four 20-cal. M1885 guns, all in individual pivot mounts. They were also armed with two torpedo tubes in their hulls above the waterline, one per broadside. In addition, they carried a pair of 16-cal. M1881 field guns that could be sent ashore with a landing party. They had a capacity to carry fifty naval mines, which were stored in the compartment for the steering engine. A rail extended aft, through the captain's cabin, to a port in the stern, where the mines could be dropped into the ships' wake.
Armor protection consisted of a curved armor deck that was thick on the flat portion, curving down at the sides, where it increased in thickness to , decreasing back down to 25 mm at the lower edge. The deck consisted of mild steel, and was layered on of normal deck plating. Above the deck, a cellular layer of watertight compartments was intended to contain flooding below the waterline. A light splinter deck that was thick covered the propulsion machinery spaces to protect them from shell fragments that penetrated the main armor deck. The gun shields for the deck-mounted 100 mm guns were thick. had steel plating on the conning tower, while received .
Construction + Construction data Name Budget designation Laid down Launched Commissioned Shipyard E3 February 1894 8 October 1896 12 May 1897 , Graville E4 5 November 1895 6 July 1898 6 August 1898 , Lormont E5 Allocated to 1894 budget, but cancelled before construction Unnamed E6 Allocated to 1894 budget, but cancelled before construction
Service history
was assigned to the Northern Squadron in 1898, where she conducted training exercises with the rest of the unit. During maneuvers that year, she accidentally ran aground, but was not seriously damaged in the incident. She served in the unit for less than a year before being transferred to the reserve fleet. was sent to the Pacific Ocean for a lengthy deployment after her completion in 1899. She helped suppress a fire in the United States in 1900 and protected French interests in Colombia during a conflict in the country in 1901. had been recommissioned and sent abroad by 1901, being stationed in French Madagascar. She operated there at least through 1902.
At some point thereafter, was recalled home and decommissioned once more. From 1903 to 1905, she lay at Lorient, where she was "completely abandoned". In early 1905, she was recommissioned to relieve , which had also been recalled home that year. After arriving in France, it was determined that s boilers were in poor condition, but repairs were deemed to be too expensive. She was converted into a training ship for gun crews at the Gunnery School in 1908, but served in that capacity for just two years. She was struck from the naval register in 1910 and thereafter broken up. s career in the Pacific was uneventful, and she remained on station in the region through 1908. She was placed in reserve in July 1909, struck in 1910, and followed her sister ship to the breakers' yard in 1911.
Footnotes Notes
Citations
References
Further reading