Valdosaurus ("Weald lizard") is a genus of bipedal herbivorous dryosaurid dinosaur known from the Early Cretaceous of the Isle of Wight and elsewhere in England. Originally its remains were believed to belong to Hypsilophodon. In 1889, Richard Lydekker assigned them to Camptosaurus, alongside a partial lower jaw, and applied the name Camptosaurus valdensis. In the 1970s, Peter Galton reassigned these remains to a new species of Dryosaurus, then to an entirely new genus and species, that being Valdosaurus proper. The type and only species of Valdosaurus, named by Galton, is V. canaliculatus.
Numerous specimens have been assigned to Valdosaurus over the years. Some, namely those found in Niger (now Elrhazosaurus), have been reassigned to different genera, while others have simply been redesignated as indeterminate. With that said, additional specimens of V. canaliculatus have been discovered. The most complete is a specimen discovered in 2012 at Compton Bay on the Isle of Wight, which consists of a largely articulated rear half of the animal. Whereas the type specimens were very small, with a femur (thigh bone) length of just and an estimated body mass of , larger specimens such as the Compton specimen may have reached body lengths of around and body masses of roughly .
Discovery and naming At some point in the 19th century, the Rev. William Fox collected two small femora (upper leg bones) near Cowleaze Chine on the south-west coast of the Isle of Wight. In 1888, these specimens, BMNH R184 and R185, were assigned to Hypsilophodon foxii by Richard Lydekker. The femora were associated with a tibia, and were subsequently assigned to the possible tyrannosauroid genus Calamosaurus.Lydekker. R. (1891). On certain ornithosaurian and dinosaurian remains. Quarterly Journal of the Geological Society of London 47:41-44. In 1889, Lydekker assigned them to Camptosaurus, alongside a partial mandibular ramus (half of a lower jaw), BMNH R180, applying the species name C. valdensis to all of these remains. The species name, valdensis derives from valdo, a modification of the Old English word weald ("a wood") which refers to the Weald area.
In a 1974 paper, Peter Galton examined the holotype femur of C. valdensis, and came to the conclusion that it belonged to a large specimen of Hypsilophodon; he believed, as had been suggested by Sir Richard Owen more than a century prior, that BMNH R180 belonged to a juvenile Iguanodon. In 1975, Galton re-examined the femora, and concluded that they did not belong to Camptosaurus. He therefore assigned them to Dryosaurus, and applied the name Dryosaurus canaliculatus. The specific name means "with a small channel" in Latin, referring to a distinct groove between the condyles of the lower femora.Galton, P.M., 1975, "English hypsilophodontid dinosaurs (Reptilia: Ornithischia)", Palaeontology 18(4): 741-752 Two years later, Galton recognised that they were in fact morphologically distinct from Dryosaurus, and erected a new genus for them, Valdosaurus. The type species, D. canaliculatus, was thus renamed V. canaliculatus. Galton speculated that Valdosaurus might have been a direct descendant of Dryosaurus, based on the supposed ubiquity of that genus across Europe, Africa, and Asia. Furthermore, Galton reassigned BMNH R180 to Valdosaurus, after briefly and provisionally considering it a specimen of Vectisaurus.Galton, P.M., 1977. "The Upper Jurassic dinosaur Dryosaurus and a Laurasia-Gondwana connection in the Upper Jurassic", Nature 268(5617): 230-232
Additional remains and reassigned species A second species, V. nigeriensis, was described by Galton and Philippe Taquet from younger rocks from Niger in 1982.Galton, P.M. & P. Taquet, 1982, "Valdosaurus, a hypsilophodontid dinosaur from the Lower Cretaceous of Europe and Africa", Géobios 13: 147-159 In 1998 William Blows inadvertently named another species, Valdosaurus dextrapoda, by including this name in a fauna list.Blows, W.T., 1998, "A review of Lower and Middle Cretaceous dinosaurs of England", New Mexico Museum of Natural History and Science Bulletin, Albuquerque 14: 29-38 This was an error, and the species has never been supported.Martill, D.M. and Naish, D., 2001, "Ornithopod dinosaurs." Pages 60-132 in Martill, D.M. and Naish, D. (eds.). Dinosaurs of the Isle of Wight, The Palaeontological Association, London.Galton, P.M., 2009, "Notes on Neocomian (Late Cretaceous) ornithopod dinosaurs from England - Hypsilophodon, Valdosaurus, "Camptosaurus", "Iguanodon" - and referred specimens from Romania and elsewhere", Revue de Paléobiologie 28(1): 211-273 In 2009, Galton reviewed the Valdosaurus material. He concluded that no fossils from outside England could be reliably referred to the genus. He thus gave V. nigeriensis its own genus: Elrhazosaurus. Even where many of the English specimens were concerned it was uncertain whether they belonged to Valdosaurus, including all cranial elements and teeth. Some hindlimb and pelvic bones from the Upper Weald Clay Formation (late Barremian) were referable to V. canaliculatus. Some material from the earlier Hastings Beds (Valanginian) were referred to a Valdosaurus sp. Galton established that Richard Owen had in 1842 been the first to describe Valdosaurus thighbones, specimens BMB 004297-004300, assigning them to Iguanodon.
Having a close European relative of the American form Dryosaurus named led to most of the dryosaurid fossil material of Europe being referred to Valdosaurus. Valdosaurus was seen as not only present in England (the Wessex Formation of the Isle of Wight and the Hastings Beds of West Sussex). Records from Spain remain questionable. These rock units were deposited between the Berriasian and Barremian stages, between approximately 145 and 125 million years ago. V. canaliculatus would then be known from thigh bones, extensive additional postcranial elements, partial lower jaws, and teeth.In 1888, Richard Lydekker described an ilium, BMNH R2150 from Sussex, assigning it to Hylaeosaurus. That specimen was subsequently assigned to Valdosaurus canaliculatus. In 2012, a new specimen of Valdosaurus was discovered, in Compton Bay on the Isle of Wight, by Nick Chase; the exact location of its discovery has been withheld to prevent attempts to steal material from the site. The specimen, since designated IWCMS 2013.175, is the most complete Valdosaurus yet found. It was found partly articulated and includes a partial dorsal (back) series, an almost complete caudal (tail) series, pelvic material, and both hind limbs. In life, the specimen would have been around long.Barrett, Paul. (2016). A new specimen of Valdosaurus canaliculatus (Ornithopoda: Dryosauridae) from the Lower Cretaceous of the Isle of Wight, England. Memoirs of Museum Victoria. 74. 29-48. 10.24199/j.mmv.2016.74.04.
Description
Size
In his 2009 re-examination of Valdosaurus, Peter Galton emphasised that though the type femora were very small, in length, which has led to estimates of a length of and a weight of ,Paul, G.S., 2010, The Princeton Field Guide to Dinosaurs, Princeton University Press p. 283 they came from a juvenile individual; an adult would have been a "medium-sized euornithopod", with femora reaching a length of something like , a length attained by specimen MIWG.6879 (a complete hind limb). In 2001, Darren Naish and David Martill suggested based on that specimen that skeletally mature V. canaliculatus would have a maximum body length of about , a shoulder height of about , and a body mass of , though most specimens were about in length.
Skeleton
The most complete specimen of Valdosaurus, IWCMS 2013.175, preserves six dorsal (back) vertebrae. The best preserved is the first in the sequence, which preserves a complete centrum (main body) and part of the neural arch, minus the articular processes. Based on this vertebra, the neural arches would have extended for almost the full lengths of the centra. There is no indication that parapophyses were present, suggesting that they had completely fused with the diapophyses, which are unpreserved. At the base of the anterior (front) surface of the neural spine is a small, elliptical fossa. While the sacrum (a bony structure over the hips consisting of fused vertebrae) is preserved, it is largely obscured by the ilia. The exact number of sacral vertebrae is unclear, though was likely between five and six. IWCMS 2013.175 preserves most, if not all of the caudal (tail) vertebrae, 45 in total, and bears the most complete tail of any described dryosaurid. Many of the vertebrae are not only fully preserved, but are also articulated. The caudal vertebrae of Valdosaurus differ from those of other ornithischians in that the vertebrae in the middle of the caudal series have neural spines (the tall, dorsal/upper midline structures) which are lengthened and backswept to such an extent that each overhangs more than one postceding vertebra. The morphology of the caudal vertebrae shifts from the proximal vertebrae to those in the middle, with, for example, the chevrons being far smaller, roughly equal in length to the vertebral centra to which they attach. Several ossified tendons are preserved.
Both of IWCMS 2013.175's ilia are fairly complete. Each is long and low, with a sinuous dorsal (upper) margin. Both ischia are also known, though the femora and surrounding matrix obscure their proximal parts and their shafts are poorly preserved. In other dryosaurids, the obturator notch on the pubis (to which certain obturator muscles attached) is closed, but in V. canaliculatus, it is open. Valdosaurus' hind limbs are well known from various specimens. The fourth trochanter, the structure on the femur to which the caudofemoralis muscle would have attached, is on the proximal (closer) half of the femoral shaft. The lesser trochanter of the femur is rod-like, and is separated from the greater trochanter by a cleft. There is no evidence that V. canaliculatus retained its first or fifth metatarsals.
Classification Galton assigned Valdosaurus to the Hypsilophodontidae, using an older and broader definition, wherein it is paraphyletic. This definition of hypsilophodontids has been largely abandoned in favour of a more restrictive one. In 1972, before the proper naming of Valdosaurus, Galton suggested that it was the endpoint of a lineage starting with "Camptosaurus" leedsi (now Callovosaurus), and continued by Dysalotosaurus, Dryosaurus, and then Valdosaurus itself.
A cladogram depicting the ornithischian interrelationships suggested by Galton is as follows: Today Valdosaurus is generally considered a member of the Dryosauridae.Norman, David. (2011). Ornithopod dinosaurs. In Batten, D. J. (ed.) English Wealden Fossils. The Palaeontological Association (London), pp. 407–475. A particularly close relationship with Elrhazosaurus from the Early Cretaceous of North Africa, (and which was formerly considered a species of Valdosaurus) has been proposed. Cladogram from Madzia, et al. 2020:
Palaeoenvironments
Hastings Beds/Lower Wealden