Strength training, also known as weight training or resistance training, is exercise designed to improve physical strength. It may involve lifting weights, bodyweight exercises (such as push-ups, pull-ups, and squats), isometrics (holding a position under tension, such as planks), and plyometrics (explosive movements like jump squats and box jumps).
Training works by progressively increasing the force output of the muscles and uses a variety of exercises and types of equipment. Strength training is primarily an anaerobic activity, although circuit training also is a form of aerobic exercise.
Strength training can increase muscle, tendon, and ligament strength as well as bone density, metabolism, and the lactate threshold; improve joint and cardiac function; and reduce the risk of injury in athletes and the elderly. For many sports and physical activities, strength training is central or is used as part of their training regimen.
Principles and training methods
Strength training follows the fundamental principle that involves repeatedly exercising a muscle group. This is typically done by contracting the muscles during an exercise and then returning to the starting position. This process may be repeated for several repetitions until the muscles reach the point of failure. Strength training typically follows the principle of progressive overload, in which muscles are subjected to gradually increasing resistance over time to stimulate adaptation and growth. They respond by growing larger and stronger. People who are beginning strength training are in the process of training the neurological aspects of strength, including the ability of the brain to generate a rate of neuronal action potentials that will produce a muscular contraction that is close to the maximum of the muscle's potential.
Repetitions and sets In strength training, an exercise is commonly performed several times in a row. Each performance is known as a repetition. Two or more repetitions make a set. For each repetition, a person moves through one or more stages of movement. This may involve an eccentric phase where a muscle lengthens, and a concentric phase where it shortens. Each phase is preceded by a preparatory and preloading phase, and followed by a recovery phase. For example, someone doing a press up exercise will position themselves on their hands and feet with their body straight. They then begin a repetition: they prepare to lower themselves, then they bend their arms and lower themselves (called the eccentric phase due to the lengthening of the triceps), they then stop themselves close to the floor and recover their energy- the recovery may be very briefly performed or may take longer depending on how tired they are. They then prepare to raise themselves making whatever adjustments to their position as they feel are needed and preloading themselves in terms of energy, they then straighten their arms and raise themselves (the concentric phase), and at the top of the movement they stop and recover- the recovery in this position is significantly greater than in the lower position. The repetition cycle is then repeated beginning with a new preparatory phase. For different exercises the cycle may alter but will always contain preparatory and recovery phases.
Sets may also be performed multiple times with rest periods between them. For example, the pattern may be 10 press ups, then two minutes rest, 10 press ups, then two minutes rest etc.
The ability to recover during an exercise (active recovery), during a training session, and resting between training sessions are all of fundamental importance in strength training. If recovery cannot take place then fatigue may occur leading to worse performance and an increased chance of injury.
Proper form
Strength training also requires the use of proper or 'good form', performing the movements with the appropriate muscle group, and not transferring the weight to different body parts in order to move greater weight (called 'cheating'). An injury or an inability to reach training objectives might arise from poor form during a training set. If the desired muscle group is not challenged sufficiently, the threshold of overload is never reached and the muscle does not gain in strength. At a particularly advanced level, however, "cheating" can be used to break through strength plateaus and encourage neurological and muscular adaptation.
Maintaining proper form is one of the many steps in order to perfectly perform a certain strength training technique. Correct form in weight training improves strength, muscle tone, and maintaining a healthy weight. Improper form can lead to strains and fractures.
Stretching and warm-up
Weight trainers often spend time warming up before starting their workout, a practice strongly recommended by the National Strength and Conditioning Association (NSCA). A warm-up may include cardiovascular activity such as light stationary biking (a "pulse raiser"), flexibility and joint mobility exercises, static and/or dynamic stretching, "passive warm up" such as applying heat pads or taking a hot shower, and workout-specific warm-up, such as rehearsal of the intended exercise with no weights or light weights. The intended purpose of warming up is to enhance exercise effectiveness and reduce the risk of injury.
Evidence is limited regarding whether warming up reduces injuries during strength training. As of 2015, no articles existed on the effects of warm-up for upper body injury prevention. For the lower limbs, several programs significantly reduce injuries in sports and military training, but no universal injury prevention program has emerged, and it is unclear if warm-ups designed for these areas will also be applicable to strength training. Static stretching can increase the risk of injury due to its analgesic effect and cellular damage caused by it.
The effects of warming up on exercise effectiveness are clearer. For 1RM (One-repetition maximum) trials, an exercise rehearsal has significant benefits. For submaximal strength training (3 sets of 80% of 1RM to failure), exercise rehearsal does not provide any benefits regarding fatigue or total repetitions for exercises such as bench press, squats, and arm curl, compared to no warm-up. Dynamic warm-ups (performed with greater than 20% of maximal effort) enhance strength and power in upper-body exercises. When properly warmed up the lifter will have more strength and stamina since the blood has begun to flow to the muscle groups. Pulse raisers do not have any effect on either 1RM or submaximal training. Static stretching induces strength loss, and should therefore probably not be performed before strength training. Resistance training functions as an active form of flexibility training, with similar increases in range of motion when compared to performing a static stretching protocol. Static stretching, performed either before or after exercise, also does not reduce muscle soreness in healthy adults.
Breathing Like numerous forms of exercise, weight training has the potential to cause the breathing pattern to deepen. This helps to meet increased oxygen requirements. One approach to breathing during weight training consists of avoiding holding one's breath and breathing shallowly. The benefits of this include protecting against a lack of oxygen, passing out, and increased blood pressure. The general procedure of this method is to inhale when lowering the weight (the eccentric portion) and exhale when lifting the weight (the concentric portion). However, the reverse, inhaling when lifting and exhaling when lowering, may also be recommended. There is little difference between the two techniques in terms of their influence on heart rate and blood pressure.
On the other hand, for people working with extremely heavy loads (such as powerlifters), breathing à la the Valsalva maneuver is often used. This involves deeply inhaling and then bracing down with the abdominal and lower back muscles as the air is held in during the entire rep. Air is then expelled once the rep is done, or after a number of reps is done. The Valsalva maneuver leads to an increase in intrathoracic and intra-abdominal pressure. This enhances the structural integrity of the torso—protecting against excessive spinal flexion or extension and providing a secure base to lift heavy weights effectively and securely. However, as the Valsalva maneuver increases blood pressure, lowers heart rate, and restricts breathing, it can be a dangerous method for those with hypertension or for those who faint easily.
Training volume Training volume is commonly defined as sets × reps × load. That is, an individual moves a certain load for some number of repetitions, rests, and repeats this for some number of sets, and the volume is the product of these numbers. For non-weightlifting exercises, the load may be replaced with intensity, the amount of work required to achieve the activity. Training volume is one of the most critical variables in the effectiveness of strength training. There is a positive relationship between volume and hypertrophy.
The load or intensity is often normalized as the percentage of an individual's one-repetition maximum (1RM). Due to muscle failure, the intensity limits the maximum number of repetitions that can be carried out in one set, and is correlated with the repetition ranges chosen. Depending on the goal, different loads and repetition amounts may be appropriate:
Strength development (1RM performance): Gains may be achieved with a variety of loads. However, training efficiency is maximized by using heavy loads (80% to 100% of 1RM). The number of repetitions is secondary and may be 1 to 5 repetitions per set. Muscle growth (hypertrophy): Hypertrophy can be maximized by taking sets to failure or close to failure. Any load 30% of 1RM or greater may be used. The NCSA recommends "medium" loads of 8 to 12 repetitions per set with 60% to 80% of 1RM. Endurance: Endurance may be trained by performing many repetitions, such as 15 or more per set. The NCSA recommends "light" loads below 60% of 1RM, but some studies have found conflicting results suggesting that "moderate" 15-20RM loads may work better when performed to failure.
Training to muscle failure is not necessary for increasing muscle strength and muscle mass, but you must get within two to three reps of failure to see proper results.
Movement tempo
The speed or pace at which each repetition is performed is also an important factor in strength and muscle gain. The emerging format for expressing this is as a 4-number tempo code such as 3/1/4/2, meaning an eccentric phase lasting 3 seconds, a pause of 1 second, a concentric phase of 4 seconds, and another pause of 2 seconds. The letter X in a tempo code represents a voluntary explosive action whereby the actual velocity and duration is not controlled and may be involuntarily extended as fatigue manifests, while the letter V implies volitional freedom "at your own pace". A phase's tempo may also be measured as the average movement velocity. Less precise but commonly used characterizations of tempo include the total time for the repetition or a qualitative characterization such as fast, moderate, or slow. The ACSM recommends a moderate or slower tempo of movement for novice- and intermediate-trained individuals, but a combination of slow, moderate, and fast tempos for advanced training.