The Prue UHP-1 is an American high-wing, single-seat, T-tailed FAI Open Class glider that was designed by Irving Prue.Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 57, Soaring Society of America November 1983. USPS 499-920
Design and development The prototype Prue UHP-1 was constructed by Prue, completed in 1966 and first flown in 1967.
The prototype features a NACA 63-618, with an all-metal wing with doped aircraft fabric covering aft of the wing spar. This arrangement did not hold the correct airfoil shape at high speeds according to tests conducted. The fuselage is also of all-metal construction and features a fixed monowheel landing gear, coupled with a skid, a conventional T-tail and a drag chute. Aside from the drag chute, glide path control is via spoilers.
Two Prue UHP-1s were built, the second incorporating many changes to the design. Both aircraft were registered as Experimental - Amateur-builts.
Operational history The second UHP-1 built was reported by the owner as having good handling characteristics and a lower minimum sink speed than a Schleicher ASW 17.
As of June 2011 both aircraft are still registered with the Federal Aviation Administration.
Variants UHP-1 Initial prototype with fixed landing gear. UHP-1 Modified The second aircraft, built in 1974, which incorporates an all-metal wing to address the fabric issues on the first aircraft. It also has retractable monowheel landing gear, the nose and canopy from a Schempp-Hirth Open Cirrus, flaps, water ballast and a fully trimmable tailplane. The aircraft is officially registered with the FAA as a UHP-1 MODIFIED and has an empty weight that is more than heavier than the prototype.
Specifications (UHP-1 Modified)
See also
References