The Law of Maximum also known as Law of the Maximum is a principle developed by Arthur Wallace which states that total growth of a crop or a plant is proportional to about 70 growth factors. Growth will not be greater than the aggregate values of the growth factors. Without the correction of the limiting growth factors, nutrients, waters and other inputs are not fully or judicially used resulting in wasted resources.
Applications
The factors range from 0 for no growth to 1 for maximum growth. Actual growth is calculated by the total multiplication of each growth factor. For example, if three factors had a value of 0.5, the actual growth would be:
0.5 × 0.5 × 0.5 = 0.125, which is 12.5% of optimum.
If each of the three factors had a value of 0.9 the actual growth would be:
0.9 × 0.9 × 0.9 = 0.729, which is 72.9% of optimum.
Hence the need to achieve maximal value for each factor is critical in order to obtain maximal growth.
Demonstrations of "Law of the Maximum"
The following demonstrates the Law of the Maximum. For the various crops listed below, one, two or three factors were limiting while all the other factors were 1. When two or three factors were simultaneously limiting, predicted growth of the two or three factors was similar to the actual growth when the two or three factors were limits individually and then multiplied together.
Percent of Optimum growth (Measured growth) predicted growth (calculated growth) Soybeans Low phosphorus 83% Low nitrogen 71% Both low phosphorus actual result 57% 59% (83% x 71%) and low nitrogen Wheat Low moisture 66% Low nitrogen 27% Both low moisture actual 18% 18% (66% x 27%) and low nitrogen Bush beans Nickel addition 42% Copper addition 71% Vanadium addition 39% All 3 metals actual 10% 11% (42% x 70% x 39%) Tomato Presence of insects 37% Nutrient deficiencies 78% Both presence of insects and nutrient deficiencies actual 29% 29% (37% x 78%) Tomato – poor physical soil conditions Correction with organic matter 43% Correction with P.A.M. 82% No corrections 33% 18% (66% x 27%) Corrections with both organic matter and P.A.M. 100%
Growth Factors
A. Adequacy of Nutrients Nitrogen Phosphorus Potassium Calcium Magnesium Sulfur Iron Zinc Manganese Copper Boron Chlorine Cobalt Sodium Nickel
B. Non-nutrient elements and nutrients excesses that cause toxicities (stresses) Nickel Cadmium Nickel Copper Boron Sodium chloride Aluminium Bicarbonate others
C. Interactions of the nutrients Cation ratios (metals) Carbon:Nitrogen ratio recycling available soil ratios of heavy metals ratios of all the nutrients Nitrate vs ammoniacal nitrogen
D. Soil Conditioning requirement and physical processes Low pH (soluble Al) high pH salinity, EC (electrical conductivity) either too low or too high, ratios of sand vs. silt vs. clay presence of rocks soil organic matter soil aeration limestone soil moisture conditions (frequency of rain or irrigation) depth to water table other subsoil conditions earthworms cation exchange capacity soil erosion (dust and water) redox, soil crusting structures of soil that give aeration and water penetration fixation of nutrients by soil hydrophobic conditions other aspects of soil quality, slope and topography of lands
E. Additional biology Favorable and unfavorable microorganisms Mycorrhizae Diseases Insects Weeds other macro organisms and anaerobic decomposition products
F. Weather factors Intensity, amount, frequency of rain events Wind Hail Snow day and night temperature times of freezing, humidity light hours and percent of light saturation (cloud cover) photoperiods air pollution
G. Management Crop rotations timing of operations choice of tillage use of appropriate cultivars and varieties irrigation fertilizer distribution use of soil conditioners to correct problems
External links Law of the Maximum, in Handbook of soil science by Malcolm E. Sumner
References