The Chevrolet El Camino is a coupé utility vehicle that was produced by Chevrolet in 1959 and 1960, and from 1964 to 1987. Unlike a standard pickup truck, the El Camino was adapted from the standard two-door Chevrolet station wagon platform and integrated the cab and cargo bed into the body.
Introduced in the 1959 model year in response to the success of the Ford Ranchero coupé utility, its first run, based on the Biscayne's B-body, lasted only two years. Production resumed for the 1964–1977 model years based on the Chevelle platform, and continued for the 1978–1987 model years based on the GM G-body platform.
Although based on corresponding General Motors car lines, the vehicle is classified in the United States as a pickup. GMC's badge engineered El Camino variant, the Sprint, was introduced for the 1971 model year. Renamed Caballero in 1978, it was also produced through the 1987 model year.
Background The concept of a two-door vehicle based on a passenger car chassis with a tray at the rear began in the United States in the 1920s with the roadster utility (also called "roadster pickup" or "light delivery") models.
Ford Australia was the first company to produce a coupé utility as a result of a 1932 letter from the wife of a farmer in Victoria, Australia, asking for "a vehicle to go to church in on a Sunday and which can carry our pigs to market on Mondays". Ford designer Lew Bandt developed a suitable solution, and the first coupé utility model was released in 1934. Bandt went on to manage Ford's Advanced Design Department, being responsible for the body engineering of the mid-1960s to early-1970s XP, XT, XW, and XA series Ford Falcon utilities. General Motors’ Australian subsidiary Holden also produced a Chevrolet coupé utility in 1935, and Studebaker produced the Coupé Express from 1937 to 1939. The body style did not reappear on the American market until the release of the 1957 Ford Ranchero.
Both the coupé utility and the similar open-topped roadster utility continued in production, but the improving economy of the mid- to late-1930s and the desire for improved comfort saw coupé utility sales climb at the expense of the roadster utility until, by 1939, the latter was all but a fading memory.
In 1957, Ford introduced the Ranchero, and established a new market segment in the U.S. of an automobile platform based coupé utility. In 1959, Chevrolet responded with the El Camino to compete with Ford's full-sized Ranchero. The original El Camino and Ranchero would compete directly only in the 1959 model year.The Editors of Consumer Guide
First generation (1959–1960)
1959 The El Camino was introduced for the 1959 model year two years after the Ford Ranchero. According to Chevrolet stylist Chuck Jordan, GM Harley Earl had suggested a coupé pickup in 1952.
Like the Ranchero, it was based on an existing and modified platform, the new-for-1959 Brookwood two-door station wagon, itself based on the redesigned full-sized Chevrolet of that year. Highly stylized, it initially sold 50% more briskly than the more conservative Ranchero, some 22,000 to 14,000.
Unlike the Brookwood wagon and a sedan delivery variant, the El Camino was available with any full-sized Chevrolet drivetrain. It came in a single trim level, its exterior using the mid-level Bel-Air's trim, and the interior of the low-end Biscayne. Its chassis featured Chevrolet's "Safety-Girder" X-frame design and a full-coil suspension, both introduced in the 1958 model year. The wheel-base was longer, and overall length for all 1959 Chevrolets was up to . The El Camino's payload rating ranged from , with gross vehicle weights ranging from depending on powertrain and suspension. The somewhat soft passenger car suspension of the base model left the vehicle level without a load, in contrast the Ranchero, where standard 1100-pound rated heavy duty rear springs gave it a distinct rake when empty. The quirky Level Air suspension option, in its second and final year, was listed as available, but was almost never seen on any Chevrolet model, much less an El Camino. The 1959 El Camino was promoted as the first Chevrolet pickup built with a steel bed floor instead of wood. The floor was a corrugated sheetmetal insert, secured with 26 recessed bolts. Concealed beneath it was the floor pan from the Brookwood two-door wagon, complete with foot wells. Box capacity was almost .
Among the performance engines offered were a 283-cid Turbo-Fire V8 with two- or four-barrel carburetion, several Turbo-Thrust 348-cid V8s with four-barrel or triple two-barrel carburetors producing , and 250- and 290-bhp 283-cube Ramjet Fuel Injection V8s.
Hot Rod magazine conducted a test of an El Camino equipped with the hottest powertrain combination available in early 1959—a , triple-carb, solid-lifter 348 V8 mated to a four-speed. Staff testers clocked 0-60 mph times of around seven seconds, estimated top speed at , and predicted 14-second/100-mph quarter-mile performance with a rear-axle ratio suitable for drag racing installed.
A total of 22,246 El Caminos were produced for 1959. That bested the count of 21,706 first-year Rancheros made in 1957 and the 14,169 Ford sedan pickups built in direct competition for the 1959 model year.
1960 The similar but less flamboyant 1960 model started at $2366 for the six-cylinder model; another $107 for a V8 with the two-barrel 283. At first glance, the exterior once again had a Bel Air look, with that series' bright-metal "jet" appliqué and narrow trailing molding used to accent the rear quarters. Inside, Biscayne/Brookwood appointments also persisted. The seat was now covered in striped-pattern cloth with vinyl facings. Available interior trim shades were once again gray, blue, and green. Floor coverings were in medium-tone vinyl. Mid-1959 powertrain availability was carried over with minimal changes for 1960: The base 283-cid V8 was detuned a bit for fuel economy and was now rated at , and the fuel-injected engines were officially gone.
Orders plummeted by a third, to just 14,163, at which point Chevrolet discontinued the model; meanwhile, Ford moved 21,027 Rancheros, which were now based on the brand-new Falcon compact. The pioneering American sedan pickups just did not connect with enough car-buying Americans. Perhaps these early "crossovers" didn't carry enough passengers; in a time when baby-boomer families dominated the market, three across was the best they could offer. Cargo volume was meager compared with pickup trucks. The low-level trim and marketing efforts focused almost exclusively on commercial customers may have inhibited sales, as well.
Between the discontinuation of the first generation and the introduction of the second, the Chevrolet Greenbrier, based on the Corvair platform, replaced the El Camino as Chevrolet’s car-based pickup.
+ Production numbers Model year Total production 1959 22,246 1960 14,163
Second generation (1964–1967)
Chevrolet reintroduced the El Camino four years later based on the mid-size Chevrolet Chevelle. The 1964 model was similar to the Chevelle two-door wagon forward of the B-pillars and carried both "Chevelle" and "El Camino" badges, but Chevrolet marketed the vehicle as a utility model and the Chevelle's most powerful engines were not available. Initial engine offerings included six-cylinder engines of 194 and 230 cubic inches with horsepower ratings of , respectively. The standard V8 was a 283 cubic-inch Chevrolet small block with two-barrel carburetor and with optional engines including a 283 with four-barrel carburetor and dual exhausts. Added to the El Camino's option list during the course of the 1964 model year were two versions of the 327 cubic-inch small block V8 rated at —the latter featuring a higher compression ratio of 10.5:1, larger four-barrel carburetor and dual exhausts.1964 El Camino brochure El Caminos also featured Air shocks in the rear, as well as fully boxed frames. The shocks were continued over all generations, the frames only thru 1967.Owner observation
1965 The 1965 El Camino received the same facelift as the 1965 Chevelle, with a more pronounced V-shaped front end, and a higher performance L79 version of the 327 engine rated at that was also available in Chevelles. Most of the other engines were carried over from 1964, including the 194 and 230 cubic-inch Turbo Thrift sixes, the 283 cubic-inch Turbo-Fire V8 and 327 cubic-inch Turbo-Fire V8s of .1965 El Camino brochure
1966 In 1966, GM added a V8 engine to the lineup rated from 325 to . The 1965 327 would run low 15s in the 1/4 mile (at some 90 mph), while 1966 to 1969 models were easily into the mid- to upper-14s. New sheetmetal highlighted the 1966 El Camino, identical to the Chevelle. A new instrument panel with horizontal sweep speedometer was featured. Inside, the standard version featured a bench seat interior and rubber floor mat from the low-line Chevelle 300 series, while the Custom used a more upscale interior from the Chevelle Malibu with plusher cloth-and-vinyl or all-vinyl bench seats and deep twist carpeting. A tachometer was optional.
1967 The 1967 El Camino followed the Chevelle's styling facelift with a new grille, front bumper, and trim. Air shocks remained standard equipment on the El Camino, allowing the driver to compensate for a load. The 1967 model year also brought the collapsible steering column and options of disc brakes and Turbo Hydramatic 400 3-speed automatic transmission. It was the second year the 396 (L35, L34, and L78) could be had in the El Camino (both 13480 300 Deluxe base and 13680 Malibu series). Since the L35 396/325 hp engine was the base for the SS396 series, the number of L35 engines reported sold by Chevrolet in 1967 (2,565) were sold in one of the two El Camino series, which were the only other series the engine could be ordered in. Since the L34 () & L78 () were available in either El Camino series as well as the two SS396 body styles, there is no way of knowing how many of these optional engines went to which body style. Chevrolet does report 17,176 L34 and 612 L78 engine options were sold in 1967 Chevelles, but there is no breakdown of body styles. The TH400 3-speed automatic was now available as an option (RPO M40) with the 396 engine in both the SS396 series and the 396-equipped El Caminos. The 3-speed manual transmission remained the standard transmission with a heavy duty (RPO M13) also available along with the 2-speed Powerglide and either M20 wide ratio or M21 close ratio 4-speed transmissions. Although there was no actual factory El Camino Super Sport until 1968, many owners have "cloned" '67 SS396s using 1967 Chevelle SS396 badges and trim.
+ Production numbers Model year Total production 1964 32,548 1965 34,724 1966 35,119 1967 34,830
Third generation (1968–1972)
1968–1969 Chevrolet introduced a longer El Camino in 1968, based on the Chevelle station wagon/four-door sedan wheelbase (, overall length: ); it also shared Chevelle Malibu exterior and interior trims. The interior was revamped including cloth and vinyl or all-vinyl bench seats and deep twist carpeting. All-vinyl Strato bucket seats and center console were an $111 option. Power front disc brakes and Positraction were optional. A new, high-performance Super Sport SS396 version was launched. The Turbo-Jet 396 was offered in or versions. Returning to the official options list for the first time since late 1966 was the L78. It had solid lifters, big-port heads, and an 800 cfm Holley four-barrel on a low-rise aluminum manifold. A three-speed manual was standard with all engines, and a four-speed or automatic was optional. In 1968, the SS was a separate model (the "SS-396").