The Pennsylvania Railroad's MP54 was a class of electric multiple unit railcars. The class was initially constructed as an unpowered, locomotive hauled coach for suburban operations, but were designed to be rebuilt into self-propelled units as electrification plans were realized. The first of these self-propelled cars were placed in service with the PRR subsidiary Long Island Rail Road with DC propulsion in 1908 and soon spread to the Philadelphia-based network of low frequency AC electrified suburban lines in 1915. Eventually the cars came to be used throughout the railroad's electrified network from Washington, D.C. to New York City and Harrisburg, Pennsylvania.
The cars became a commuting tradition during their long years of service in several major citiesCudahy (2003), p. 231 and were known as "red cars" or "red rattlers".Hulick, p. 19. The cars ran in service with the PRR until the Penn Central merger in 1968 at which point they were already being marked for replacement by new technology railcars such as the Budd M1 and Pioneer III. After the bankruptcy of the Penn Central the remaining MP54s found themselves being operated by Conrail under contract with local commuter rail authorities. The last MP54 cars were retired in 1980-81 while engaged in Philadelphia suburban service with SEPTA.
Steel suburban cars In 1906, during the PRR construction project to build tunnels under the Hudson and East Rivers and build Penn Station, the PRR announced that all new passenger cars would be made of steel and that wooden cars would not be allowed in the tunnels due to the hazard of fire.Baer, August 11, 1906. A design for a steel suburban car with a passenger compartment, overall length, and 72 seats was already under development,Baer, July 1906 along with one for a corresponding passenger-baggage combination car. Anticipating that many of the cars would eventually be used in electrically powered multiple-unit (MU) services, the cars were designed to accommodate electrical equipmentBall, p. 65. and were designated MP54 where the M is for motor and the P is for passenger.PRR Classification of Cars 1938.
Additional types of these cars were developed, all with the same overall length, body shape, and characteristic round end windows often referred to as porthole or owl-eyed windows and large roof-level headlights.Staufer (1993), pp. 496, 504 The passenger-baggage combination cars (52 seats) were designated MPB54. In 1911, baggage cars with baggage compartments were added and designated MB62. In 1913, baggage-mail cars with the same dimensions were added and designated MBM62. In 1914, passenger-baggage combination cars with longer baggage compartments and 40 seats were added and designated MPB54B. In 1915, passenger-baggage-mail combination cars with 24 seats were added and designated MPBM54.
Early DC MP54s
The first group of MP54 cars was delivered to the PRR subsidiary Long Island Rail Road (LIRR) in 1908 which was already operating a 650-volt DC electrified service to terminals on Long Island with its fleet of MP41 cars.Baer, November 2008 Some were used for a while in non-electrified service until the East River tunnels were completed allowing service into Penn Station. Simultaneously, the same electrical system was being installed for use in the Hudson River tunnels and west to Manhattan Transfer, just east of Newark for use by the PRR proper.
Between 1908 and 1915 the LIRR received a total of 225 MP54 type DC powered coaches and 65 other powered MP54-type cars. To supplement these, between 1915 and 1927 a total of 230 T-54 class trailer cars were added to the fleet along with a further 320 DC powered coaches between 1920 and 1927. Finally in 1930 a final batch of 45 MP54 coaches were delivered, resulting in a total fleet of 626 coaches, 15 baggage cars, 52 combines and 230 unpowered trailers for a grand total of 923 MP54 type cars in service on the LIRR.
The LIRR MP54 coaches came in three general styles. Classes MP54, MP54A and MP54A1 were delivered with a "railroad" style clerestory roof. Classes MP54B and MP54C were delivered with a smooth, "arch" roof. Finally the MP54D and MP54D1 classes were former steam coaches converted to electric operation with clerestory roofs. Unlike the later PRR cars, the LIRR units were primarily constructed by American Car and Foundry with a few made by Pressed Steel Car Company or Standard Steel Car Company.
In 1910, the PRR received its first group of MP54-type cars. Six of the coaches and two of the combination cars were provided with DC electrical equipment, and the rest were for service in trains pulled by steam or electric locomotives.Staufer (1962), p. 102, 136, 138.
Penn Station opened September 8, 1910, with service to Long Island points being provided by LIRR MP54 cars.Cudahy (2003) PRR service out of Penn began November 29, 1910 primarily using electric locomotives. The eight electrified PRR MP54 cars were used for shuttle service between Penn Station and Manhattan Transfer, an island station that facilitated passenger transfer with PRR trains going to or from Exchange Place in Jersey City. This shuttle service ended in 1922, and the cars were sent to the LIRR.Cudahy (2002), p. 47.
In addition to the cars built for the PRR and LIRR, the West Jersey and Seashore Railroad (which later became part of the Pennsylvania-Reading Seashore Lines) received a small fleet of eighteen 650 V DC powered MP54 cars for use on its electrified interurban line between Camden, Millville, and Atlantic City in 1912. These cars, officially classified as MP54D, came equipped with both third rail and also trolley poles for the segments of the line that made use of overhead lines. These cars were used until electrified service on the PRSL was ended in 1949.MP54d diagram
AC Cars for PRR Suburban Service
In late 1912, PRR engineers recommended large-scale electrification of PRR lines with alternating current (AC) at 11,000 volts and 25 cycles, starting with the suburban service along the Main Line between Philadelphia and Paoli.Baer, December 31, 1912 This project was authorized soon thereafter.Baer, March 12, 1914 In 1914, the PRR started adding AC electrical equipment to 93 MP54-type cars at the Altoona shopsStaufer (1962), p. 10 for use in this service. Each car received a pantograph, a transformer, a power truck, a motorman's cab and controls at each end, and MU circuits. These cars were then designated MP54E to distinguish them from non-electrified cars.
The Paoli line opened with electrical service in 1915 with great success, and other Philadelphia suburban lines were electrified in succeeding years. By 1933 the entire PRR line from Philadelphia to Penn Station had been provided with AC electrification and the lines from Philadelphia to Washington, D.C. and Harrisburg were subsequently electrified as well. MP54 cars then provided local service throughout this area. Large numbers of MP54 MU cars were obtained both by electrifying existing non-electrified MP54 cars and by purchasing and building entirely new cars. As improved electrical equipment was developed in later years, a numeral was added to signify the type of this equipment.MP54E5 diagram Between 1926 and 1930 a further 144 cars were delivered from PRRs main shops in Altoona, Pennsylvania and Standard Steel in the class MP54E2. Between 1932 and 1937, a total of 46 married pairs were constructed by Altoona that consisted of an unpowered trailer (designated T) that was towed by a motor car (designated E3), with 736 total horsepower compared with the normal 400: 34 (MP54E3+MP54T) + 4 (MP54E3+MBM62T) + 8 (MPB54BE3+MP54T).James These special trailer motors could be identified by a small golden keystone above the number on the side of the car. They also had larger louvers on the side due to the greater demand for cooling air.
In time it was apparent to better distinguish between the non-electrified and electrified cars aside from the letter E, thus it was decided to make the initial M be a "small" capital letter for the non-electrified cars.PRR Classification of Cars 1931 Small capital letters are awkward to use, so many booksBezillaCudahy have used the LIRR scheme of omitting the initial M for the non-electrified cars (P54) while less commonly a lower-case m is used instead of the small capital (mP54).index to PRR Classification of Cars 1931
In 1950, faced with the need for expensive new equipment for unprofitable suburban service,Bezilla, pp. 189, 193-195. the PRR decided to extend the life of the MP54 cars instead of buying new equipment. The MP54s were rebuilt at PRR's Wilmington, DE electric shops with an initial batch of fifty cars in the class MP54E5.Volkmer, p. 108. A follow-up batch of fifty 508 hp cars in the class MP54E6 were rebuilt at the Altoona shops (for unknown reasons, the designation MP54E4 was skipped). In addition to the new, more powerful propulsion gear, other new equipment was installed including roller bearing equipped equalized trucks, new windows, and recessed transit-type lightingStaufer (1968), p. 169 In 1951 there were a total of 481 AC MP54 cars of all types in service,Multiple Unit Equipment in Service as of January 15, 1951, (PRR document) consisting of 405 MP54, 42 MP54T, 10 MPB54B, 9 MPB54, 7 MB62, 4 MBM62, and 4 MBM62T cars.
Performance
While state of the art in 1908, when the last brand new MP54 rolled off the assembly line 28 years later, the design did more to suit the PRR's desire for standardization than the comfort of the passengers that rode them. Each motor car was powered by a single truck at the pantograph end which in turn was equipped with two 25 Hz series wound AC motors. Using AC motors of this type resulted in poor acceleration compared to equivalent DC motors, a problem that was exacerbated by the frequent stops the MP54s would make in local commuter service. While the 99 E5 and E6 units rebuilt in the 1950s had better performance and a stated top speed of , older E1 and E2 cars would struggle to reach . A further design flaw in the propulsion gear of the E1 and E2 models required that if power was taken off at speeds above , it could not be reapplied until the train slowed back to 30 mph lest arcing damage the motors.PRR Electric Operations Rulebook CT290 The 1908 truck design provided little in the way of ride quality, and friction bearings on unmodified cars retarded performance further. Noise from the primitive toothed gear drivetrain (a characteristic common to contemporary MU cars on other railroads) could become quite loud at high speed which made the relative quiet of unpowered trailer cars (if utilized) attractive to some regular riders.
Service history