In organic chemistry, a nitrile is any organic compound that has a functional group. The name of the compound is composed of a base, which includes the carbon of the , suffixed with "nitrile", so for example is called "propionitrile" (or propanenitrile).IUPAC Gold Book nitriles The prefix cyano- is used interchangeably with the term nitrile in industrial literature. Nitriles are found in many useful compounds, including methyl cyanoacrylate, used in super glue, and nitrile rubber, a nitrile-containing polymer used in latex-free laboratory and medical gloves. Nitrile rubber is also widely used as automotive and other seals since it is resistant to fuels and oils. Organic compounds containing multiple nitrile groups are known as cyanocarbons.
For the organic compounds of the form instead of , they are referred to as isonitriles, or isocyanides.
Inorganic compounds containing the group are not called nitriles, but cyanides instead.NCBI-MeSH Nitriles Though both nitriles and cyanides can be derived from cyanide salts, most nitriles are not nearly as toxic.
Structure and basic properties The N−C−C geometry is linear in nitriles, reflecting the sp hybridization of the triply bonded carbon. The C−N distance is short at 1.16 Å, consistent with a triple bond. Nitriles are polar, as indicated by high dipole moments. As liquids, they have high relative permittivities, often in the 30s.
History The first compound of the homolog row of nitriles, the nitrile of formic acid, hydrogen cyanide was first synthesized by C. W. Scheele in 1782.See: Carl W. Scheele (1782) "Försök, beträffande det färgande ämnet uti Berlinerblå" (Experiment concerning the colored substance in Berlin blue), Kungliga Svenska Vetenskapsakademiens handlingar (Royal Swedish Academy of Science's Proceedings), 3: 264–275 (in Swedish). Reprinted in Latin as: "De materia tingente caerulei berolinensis" in: Carl Wilhelm Scheele with Ernst Benjamin Gottlieb Hebenstreit (ed.) and Gottfried Heinrich Schäfer (trans.), Opuscula Chemica et Physica (Leipzig ("Lipsiae"), (Germany): Johann Godfried Müller, 1789), vol. 2, pages 148–174. In 1811 J. L. Gay-Lussac was able to prepare the very toxic and volatile pure acid.Gay-Lussac produced pure, liquified hydrogen cyanide in: Around 1832 benzonitrile, the nitrile of benzoic acid, was prepared by Friedrich Wöhler and Justus von Liebig, but due to minimal yield of the synthesis neither physical nor chemical properties were determined nor a structure suggested. In 1834 Théophile-Jules Pelouze synthesized propionitrile, suggesting it to be an ether of propionic alcohol and hydrocyanic acid. The synthesis of benzonitrile by Hermann Fehling in 1844 by heating ammonium benzoate was the first method yielding enough of the substance for chemical research. Fehling determined the structure by comparing his results to the already known synthesis of hydrogen cyanide by heating ammonium formate. He coined the name "nitrile" for the newfound substance, which became the name for this group of compounds. On page 96, Fehling writes: "Da Laurent den von ihm entdeckten Körper schon Nitrobenzoyl genannt hat, auch schon ein Azobenzoyl existirt, so könnte man den aus benzoësaurem Ammoniak entstehenden Körper vielleicht Benzonitril nennen." (Since Laurent named the substance that was discovered by him "nitrobenzoyl" – also an "azobenzoyl" already exists – so one could name the substance that originates from ammonium benzoate perhaps "benzonitril".)
In 1903, Arthur Lapworth investigated the formation of cyanohydrins by addition of hydrocyanic acid to aldehydes and ketones and discovered that the actual nucleophile is the cyanide ion, such that the addition of a base increases the reaction rate. This work represented one of the earliest investigations of an organic reaction mechanism.
For a long time, nitriles were primarily of academic interest. Between the First and Second World War, however, research activity increased significantly. By the second half of the 20th century, several large-scale industrial processes had been developed in which nitriles were either produced or utilized. An important example is the development of polyamides (polyamide 6.6) in the 1930s, as adiponitrile is a key intermediate in its manufacture and is produced by hydrocyanation of butadiene with hydrogen cyanide. Acrylonitrile polymers have been known since the 1920s but gained greater importance as synthetic fibers toward the late 1940s. Superglues based on cyanoacrylates have also been available since the late 1940s.
Nomenclature
The functional group of nitriles containing the triple bond is referred to as the nitrile or cyano group.Hans Beyer und Wolfgang Walter: Organische Chemie, S. Hirzel Verlag, Stuttgart, 22. Auflage, 1991, ISBN 3-7776-0485-2, S. 266–269. If the nitrile is the highest-ranking functional group, the suffix -nitrile is added to the name of the parent compound. The triply bonded carbon atom is, as always, included in the parent chain. Alternatively, the ending -carbonitrile may be used (analogous to -carboxylic acid), in which case the carbon atom is not counted as part of the parent chain. This ending must be used if the nitrile group is attached to a ring (as in ) or if not all carbon atoms are part of the parent chain, which is necessarily the case when more than two nitrile groups are present, as these can only be located at the termini of the chain. Due to their relationship to carboxylic acids (the nitrile carbon has the same oxidation state as the carboxyl carbon), trivial names are often derived from the corresponding carboxylic acids using the ending -onitrile (for example, benzoic acid to benzonitrile). If the nitrile function is not the principal functional group in the molecule, the prefix cyano- is used together with the appropriate locant. In this case as well, the triple-bonded carbon atom is not counted as part of the parent chain.
Synthesis Numerous methods are available for the preparation of nitriles. These include Kolbe nitrile synthesis, dehydration of carboxylic acid amides and oximes, and oxidation of primary amines.
Industrially, the main methods for producing nitriles are ammoxidation and hydrocyanation. Both routes are green in the sense that they do not generate stoichiometric amounts of salts.
From organic halides and cyanide salts Two salt metathesis reactions are popular for laboratory scale reactions. In the Kolbe nitrile synthesis, alkyl halides undergo nucleophilic aliphatic substitution with alkali metal cyanides. Aryl nitriles are prepared in the Rosenmund-von Braun synthesis.
In general, metal cyanides combine with alkyl halides to give a mixture of the nitrile and the isonitrile, although appropriate choice of counterion and temperature can minimize the latter. An alkyl sulfate obviates the problem entirely, particularly in nonaqueous conditions (the Pelouze synthesis).
In the Kolbe nitrile synthesis (a nucleophilic substitution reaction), an alkanonitrile and an alkali halide are formed from a reactive halocarbons and an alkali cyanide (sodium cyanide or potassium cyanide). The reaction is particularly suitable for primary, allylic, and benzylic halides. Secondary alkyl halides provide lower yields, whereas tertiary halides undergo exclusively elimination reaction instead of substitution. In addition to halides, substrates bearing other good leaving groups may also be employed. In contrast to alkali cyanides, silver cyanide is unsuitable for nitrile synthesis, as it preferentially forms isonitriles. An example of the Kolbe nitrile synthesis is the reaction of methyl iodide with sodium cyanide to yield acetonitrile and sodium iodide:
Similarly, 1,3-dibromopropane reacts with sodium cyanide to form glutaronitrile, and 1-iodooctane reacts with potassium cyanide to give nonannitrile. Cyanations can also be carried out using hydrogen cyanide in combination with triethylaluminum or with diethylaluminum cyanide; for example, in the ring opening of an epoxide to a β-cyanohydrin or in the 1,4-addition of cyanide to an enone. Trimethylsilylcyanide is another cyanating reagent capable of opening epoxides to β-cyanohydrins, with concomitant silylation of the oxygen atom. Trimethylsilyl cyanide also enables substitution of tertiary alkyl halides, which is not feasible under Kolbe nitrile synthesis conditions.
In the presence of suitable transition metal catalysts, hydrocyanation allows addition of hydrogen cyanide to the multiple bonds of alkenes and alkynes to afford nitriles. Nickel catalysts are typically employed. Direct handling of hydrogen cyanide is often unnecessary, as synthetic equivalents such as acetone cyanohydrin or isovaleronitrile may be used. An important industrial process is the hydrocyanation of butadiene to adiponitrile.
Hydrocyanation Hydrocyanation is an industrial method for producing nitriles from hydrogen cyanide and alkenes. The process requires homogeneous catalysts. An example of hydrocyanation is the production of adiponitrile, a precursor to nylon-6,6 from 1,3-butadiene:
Dehydration of amides and others Nitriles can be prepared by the dehydration of primary amides. Common reagents for this include phosphorus pentoxide () and thionyl chloride (). In a related dehydration, secondary amides give nitriles by the von Braun amide degradation. In this case, one C-N bond is cleaved.
Specifically, carboxamides and oximes can be converted to nitriles by dehydration (elimination of water). Numerous reagents and methodologies are available for this transformation. Methods for nitrile synthesis via dehydration of nitroalkanes have also been described.
Phosphorus pentoxide, known since the mid-19th century, is a classical reagent for amide dehydration. Amides can also be dehydrated using trivalent phosphorus reagents such as phosphorus trichloride or triphenyl phosphite; as well as diethyl chlorophosphate, thionyl chloride, or phosgene. In the presence of specific palladium complexes or other suitable catalysts, acetonitrile can function as a dehydrating agent, converting an amide into a nitrile while being transformed into acetamide. Similarly, dichloroacetonitrile may be employed. Related systems utilize iron(II) chloride tetrahydrate, zinc trifluoromethanesulfonate, or uranyl nitrate as catalysts in combination with N-methyl-N-trimethylsilyltrifluoroacetamide as the dehydrating reagent. Carboxylic acid amides can also be dehydrated using a system comprising triphenylphosphane, iodine, and 4-methylmorpholine. Another approach involves high-temperature dehydration (220–240 °C) in hexamethylphosphoramide (HMPA). Dehydration of primary amides with zinc chloride under microwaves is reversible. In aqueous acetonitrile, an amide can be converted to a nitrile; however, in a water–tetrahydrofuran system with added acetamide, the reverse conversion of nitrile to amide occurs.
Both carboxamides and aldoximes can be dehydrated using aluminum chloride and sodium iodide in acetonitrile. Likewise, both classes can be dehydrated with oxalyl chloride and catalytic dimethyl sulfoxide in a reaction analogous to the Swern oxidation. Conversion to nitriles under catalysis by heptavalent rhenium species (perrhenic acid or trimethylsilyl perrhenate) is effective for both amides and aldoximes; the water formed can be removed by azeotropic distillation.
The conversion of aldehydes to nitriles via aldoximes is a popular laboratory route. Aldehydes react readily with hydroxylamine salts, sometimes at temperatures as low as ambient, to give aldoximes. These can be dehydrated to nitriles by simple heating, although a wide range of reagents may assist with this, including triethylamine/sulfur dioxide, zeolites, or sulfuryl chloride. The related hydroxylamine-O-sulfonic acid reacts similarly.
In specialised cases the Van Leusen reaction can be used. Biocatalysts such as aliphatic aldoxime dehydratase are also effective.