The Klann linkage is a planar mechanism designed to simulate the gait of legged animal and function as a wheel replacement, a leg mechanism. The linkage consists of the frame, a crank, two grounded rockers, and two couplers all connected by pivot joints. It was developed by Joe Klann in 1994 as an expansion of Burmester curves which are used to develop four-bar double-rocker linkages such as harbor crane booms. It is categorized as a modified Stephenson type III kinematic chain.U.S. Provisional Application Ser. No. 60/074,425, was filed on Feb. 11, 1998
The proportions of each of the links in the mechanism are defined to optimize the linearity of the foot for one-half of the rotation of the crank. The remaining rotation of the crank allows the foot to be raised to a predetermined height before returning to the starting position and repeating the cycle. Two of these linkages coupled together at the crank and one-half cycle out of phase with each other will allow the frame of a vehicle to travel parallel to the ground.
The Klann linkage is supposed to provide many of the benefits of more advanced walking vehicles without some of their limitations. It can step over curbs, climb stairs, or travel into areas that are currently not accessible with wheels but does not require microprocessor control or multitudes of actuator mechanisms. It fits into the technological space between these walking devices and axle-driven wheels.
Mechanism Klann linkage work on the basis of kinematics where all links gives relative motion with each other. It converts the rotatory motion to linear motion, and looks like an animal walking.
This animation shows the working of a klann mechanism.
Comparison with Jansen's linkage
The Klann mechanism uses six links per leg, whereas the Jansen's linkage developed by Theo Jansen uses eight links per leg, with one degree of freedom.
Example leg
In there is a set of coordinates for an example leg: Point X Y Description Fixpoints 9 1.366 1.366 first rocker arm axle 11 1.009 0.574 second rocker arm axle 15 1.599 0.750 crank shaft fully extended ground stride position 27X 0.741 0.750 elbow joint 29x 1.331 0.750 crank 33x 0.000 0.000 foot 35x 0.232 0.866 knee joint/axle 37x 0.866 1.500 hip joint grounded gait position 27Y 1.277 0.750 elbow joint 29y 1.867 0.750 crank 33y 1.000 0.000 foot 35y 0.768 0.866 knee joint/axle 37y 1.000 1.732 hip joint
See also Wheel Linkage (mechanical) Leg mechanism Mondo Spider Jansen's linkage Chebyshev linkage and Chebyshev's Lambda Mechanism
References
External links
Animation of the linkage's climbing ability Clear side-on view of linkage in motion
Mechanicalspider https://www.instructables.com/3D-Printed-Walking-Robot-Klann-Linkage/ Mechanisms101 Mondo Spider Walking Beast Crabfu