Victoria station, also known as London Victoria, is a central London railway terminus and connected London Underground station in Victoria, in the City of Westminster, managed by Network Rail. Named after the nearby Victoria Street, the mainline station is a terminus of the Brighton Main Line to and and the Chatham Main Line to and Dover via . From the main lines, trains can connect to the Catford Loop Line, the Dartford Loop Line, the Sutton & Mole Valley lines to and the Oxted line to . Southern operates most commuter and regional services to south London, Sussex and parts of east Surrey and south-east Hampshire while Southeastern operates trains to south-east London and Kent, alongside limited services operated by Thameslink. Gatwick Express trains run direct to Gatwick. The London Underground station is served by three lines: Circle, District and Victoria. The area around the station is an important interchange for other forms of transport: a local bus station is in the forecourt and Victoria Coach Station is nearby, which serves national and international coaches.

Victoria was built to serve both the Brighton and Chatham Main Lines, and has always had a "split" feel of being two separate stations. The Brighton station opened in 1860 with the Chatham station following two years later. It replaced a temporary terminus at Pimlico, and construction involved building the Grosvenor Bridge over the River Thames. It became immediately popular as a London terminus, causing delays and requiring upgrades and rebuilding. It was well known for luxury Pullman train services and continental boat-train trips, and became a focal point for soldiers during World War I.

As at other London termini, steam trains were phased out of Victoria by the 1960s, to be replaced by suburban electric and diesel multiple-unit services; all services from the station are currently operated using third rail electric multiple units. Despite the end of international services following the opening of the Channel Tunnel, Victoria still remains an important London terminal station. The connected Underground station, in particular, suffered from overcrowding, until a major upgrade was completed in the late 2010s. Gatwick Express provides half-hourly non-stop direct services between London Victoria and Gatwick Airport. However Southern run more frequent semi-fast services to Gatwick Airport.

Location The station complex is in Victoria in the City of Westminster, immediately south of the London Inner Ring Road. It is located south of Victoria Street, east of Buckingham Palace Road and west of Vauxhall Bridge Road. Several railways lead into the station line by way of Grosvenor Bridge from the south west, south and south east. It is in London fare zone 1 and is one of 19 stations managed by Network Rail. It has been a Grade II listed building since 1970.

Victoria Coach Station is about 300 metres south-west of the railway stations. It is the main London coach terminal and serves all parts of the UK and mainland Europe.

The station is served by a large number of London Buses routes day and night, using Victoria bus station or neighbouring streets.

History

Background

By 1850, railways serving destinations to the south of London had three termini available – , and Waterloo. All three were inconvenient for Central London as they terminated south of the river Thames, whereas the main centres of population, business and government were north of the river in the City of London, the West End and Westminster.

Victoria Station was designed in a piecemeal fashion to help address this problem for the London Brighton and South Coast Railway (LB&SCR) and the London Chatham and Dover Railway (LC&DR). It consisted of two adjacent main line railway stations which, from the viewpoint of passengers, were unconnected.

Early history

The London and Brighton Railway terminus at London Bridge provided reasonable access to the City of London but was inconvenient for travellers to and from Westminster. As early as 1842 John Urpeth Rastrick had proposed that the railway should build a branch to serve the West End, but his proposal was unsuccessful.

However, the transfer of the Crystal Palace from Hyde Park to Sydenham Hill between 1851 and 1854 created a major tourist attraction in the then rural area south of London, and the LB&SCR opened a branch line from the Brighton Main Line at Sydenham to the site in 1854. While this was under construction the West End of London and Crystal Palace Railway also planned a line from Crystal Palace, to a new station at Battersea Wharf, at the southern end of the new Chelsea Bridge. Despite its location, the new station was called Pimlico. It opened on 27 March 1858, but was very much regarded as a temporary terminus, composed of a small number of wooden huts, and positioned immediately next to a proposed bridge over the Thames. Shortly afterwards the LB&SCR leased most of the lines of the new railway, and built a further connection from Crystal Palace to the Brighton Main Line at Norwood Junction, thereby providing itself with a route into west London, although it was recognised that a terminus would be needed on the north side of the river.

During the summer of 1857 a scheme for an independent "Grosvenor Basin Terminus" in the West End of London, "for the use of the Southern Railways of England" was mooted. The station was originally referred to as the "Grosvenor Terminus" but later renamed Victoria as it was sited at the end of Victoria Street. Three other railway companies were also seeking a terminus in Westminster: the Great Western (GWR), the London and North Western (LNWR), and the East Kent Railway (EKR). The first two already had rail access to Battersea through their joint ownership of the West London Line with the LB&SCR. In 1858, the leased the remaining lines of the West End of London and Crystal Palace Railway from Shortlands railway station, and also negotiated temporary running powers over the lines recently acquired by the LB&SCR, pending the construction of its own line into west London. On 23 July 1859 these four companies together formed the Victoria Station and Pimlico Railway (VS&PR), with the object of extending the railway from Stewarts Lane Junction, Battersea across the river to a more convenient location nearer the West End, and the following month the changed its name to the London Chatham and Dover Railway.

The new line followed part of the route of the Grosvenor Canal with Victoria station on the former canal basin. It required the construction of a new bridge over the Thames, originally known as Victoria Bridge and later as Grosvenor Bridge. The bridge was long, which was required so that it could clear all river traffic. It was designed by John Fowler. The line was built as mixed gauge from Longhedge Junction, Battersea, to cater for GWR trains. It required a 1-in-50 climb and a turn from the LSWR main line to reach the bridge. The LB&SCR had hoped to amalgamate with the VS&PR, and introduced a parliamentary bill to allow it to do so in 1860. This was opposed by the GWR and LC&DR and rejected. By way of compromise the LB&SCR was permitted to lease Victoria station from the VS&PR, but agreed to accommodate the other railways until a terminus could be built for them on an adjoining site.

The LB&SCR side of Victoria station opened on 1 October 1860, the temporary terminus in Battersea having closed the day before. The station was designed by Robert Jacomb-Hood. It consisted of six platforms and ten tracks, with an entrance on Victoria Street. The site then covered and was long and wide. The roof was built on a set of wrought iron girders, with an additional safety row that would allow the main girders to withstand a train strike. On the northwest corner of the station was the 300-bedroom Grosvenor Hotel. It was designed by J. T. Knowles, and run independently of the station itself. It opened in 1861. The LCDR and GWR opened their own station on 25 August 1862, occupying a less imposing wooden-fronted building with an entrance on Wilton Road. The Chatham line station had eight platforms, five of which were of mixed gauge, shared by broad-gauge trains of the GWR from Windsor via Southall.

Post-opening Victoria station proved to be unexpectedly popular for both the main companies, and by 1862 there were frequent delays due to congestion at Stewarts Lane Junction. In March 1863 the LB&SCR and the LC&DR jointly funded a new high-level route into Victoria, avoiding Stewarts Lane and requiring the widening of Grosvenor Bridge, including the replacement of the broad-gauge rails with a third LB&SCR line. The work was completed during 1867/8. The South Eastern Railway (SER) wanted to use Victoria as a London terminus as it was more convenient than London Bridge, but were advised they would need to pay extensive tolls and expenses to do so. Consequently, the SER constructed a station at instead.

The GWR began services on 1 April 1863, connecting Victoria to Southall, and later some services to Uxbridge, , and Windsor. From 13 August 1866 the LB&SCR ran services from Victoria to London Bridge along the newly completed South London Line. The Great Northern Railway began a service from Victoria to Barnet (via ) on 1 March 1868, with other cross-London services running via Victoria in the 1870s.

In 1898 the LB&SCR decided to demolish its station and replace it with an enlarged red-brick Renaissance-style building, designed by Charles Langbridge Morgan. Since widening of the station was prevented by the LC&DR station and Buckingham Palace Road, increased capacity was achieved by lengthening the platforms and building crossovers to allow two trains to use each platform simultaneously. Work was completed in 1908, and included the rebuilding of the Grosvenor Hotel at the same time. The site then covered with of platforms. Overhead electric trains began to run into Victoria on 1 December 1909, to London Bridge. The line to Crystal Palace was electrified on 12 May 1911.

Victoria became well known for its Pullman services during the late 19th century. The LB&SCR introduced the first Pullman first-class service to Brighton on 1 November 1875, followed by the first all-Pullman train in the UK on 1 December 1881. Another all-Pullman service was introduced in 1908 under the name of the Southern Belle, then described as "... the most luxurious train in the world...". The SECR began Pullman continental services on 21 April 1910 and on domestic services to the Kent coast on 16 June 1919. The Golden Arrow, another all-Pullman train began services in 1924, and remained in service until 30 September 1972.

The LC&DR and GWR jointly leased the 'Chatham' portion of the station for 999 years from 28 June 1860, with the GWR responsible for 6.67%.GWR Memorandum for the Board 23 January 1931. National Archives RAIL 1057/2931. The LC&DR completed its main line as far as Canterbury on 3 December 1860 and began to use the LB&SCR station on that day.

From 1899 the LC&DR entered a working union with its rival, the South Eastern Railway, to form the South Eastern and Chatham Railway (SECR). As a result, services from its station at Victoria began to be rationalised and integrated with those from the other SECR termini.