Lands administrative divisions of Australia are the cadastral divisions of Australia for the purposes of identification of land to ensure security of land ownership. Most states term these divisions as counties, parishes, hundreds, and other terms. The eastern states of Queensland, New South Wales, Victoria, and Tasmania were divided into counties and parishes in the 19th century, although the Tasmanian counties were renamed land districts in the 20th century. Parts of South Australia (south-east) and Western Australia (south-west) were similarly divided into counties, and there were also five counties in a small part of the Northern Territory. However South Australia has subdivisions of hundreds instead of parishes, along with the Northern Territory, which was part of South Australia when the hundreds were proclaimed. There were also formerly hundreds in Tasmania. There have been at least 600 counties, 544 hundreds and at least 15,692 parishes in Australia, but there are none of these units for most of the sparsely inhabited central and western parts of the country.

Counties in Australia have little administrative and no political function, unlike those in England or the United States. Australia instead uses local government areas, including shires, districts, city councils, and municipalities according to the state, as the second-level subdivision.

Some other states were also divided into land divisions and land districts; in the nineteenth century, land districts sometimes served as the region name for parts of the state where counties had not been proclaimed yet. Below these are groups of land parcels known as deposited plans, registered plans or title plans (depending on the state). Queensland has registered plans; New South Wales and Western Australia have deposited plans; while Victoria has certified plans. Land can be identified using the number of this plan of subdivision held with the lands department, rather than with a named unit such as a parish (or both can be used); it has become more common to use only the plan number. Within these are individual land parcels such as lots; in total there are estimated to be about 10.2 million of these in Australia.Cadastral systems within Australia The various cadastral units appear on certificates of title, which are given volume and folio numbers; these numbers by themselves are sometimes used to identify land parcels, or in combination with the other units. Detailed maps of these divisions have been required since the introduction of the Torrens title system of a central register of land holdings in South Australia in 1858, which spread to the other colonies. While cadastral data since the 1980s has been digitalised, there remain many old maps showing these divisions held in collections of Australian libraries such as the National Library of Australia,National Library of Australia, Cadastral maps as well as in state libraries.New South Wales Parish map preservation project

History

Counties were used since the earliest British settlement in Australia, with the County of Cumberland proclaimed by Captain Phillip on 4 June 1788. In 1804 Governor King divided Van Diemen's Land into two counties; Buckingham in the south and Cornwall in the north.Founding Documents , National Archives of Australia, Colonel Collins' Commission 14 January 1803 The parishes date to the surveys conducted after 1825, with the instructions given to Governor Brisbane on 23 Jun 1825 to divide the colony into counties, hundreds and parishes. At this time there were five counties already proclaimed in New South Wales: Cumberland, Westmoreland, Camden, Argyle and Northumberland.State Records NSW, Archives Investigator, Commissioners for Apportioning the Territory The Nineteen Counties in south-eastern New South Wales were the limits of location of the colony in a period after 1829, with the area outside them originally divided into districts, and later also into counties and parishes. Counties were established soon after the foundation of other Australian colonies.

Many of the counties have English names, often the names of counties in England, such as Devon, Dorset, Cornwall and Kent Counties in Tasmania. Less frequently, some have Aboriginal names such as the County of Yungnulgra in New South Wales, and County of Croajingolong in Victoria.

The use of counties, hundreds and parishes was popular in Australia in the 19th century, with many maps of Australian colonies showing these divisions,New country and rail road map of New South Wales [cartographic material] : showing rail roads, coach roads, cities, towns &c. 1887. MAP RM 1975. and towns and cities often listed in their county. Legal cases referenced counties, and many genealogical records for Australia in the 19th century list the county and parish for location of birth, deaths and marriages.Louisa Maria Adams. ancestry.com. Retrieved on 7 July 2015. The 1911 Britannica also describes Australian towns and cities as being in their respective county, including most of the capital cities: Melbourne, County of Bourke; Sydney, County of Cumberland; Brisbane, County of Stanley; Adelaide, County of Adelaide; and Hobart, County of Buckingham. However it is not mentioned that Perth was located in the County of Perth, as even by this time county names were infrequently used in Western Australia, where they did not cover all of the settled areas, unlike the other states. Instead the system of land divisions and land districts was used, with most of Perth located in the land districts of Swan, Canning and Cockburn Sound, all in the South West Land Division of Western Australia.

Counties and parishes are also still referenced in property law, and in industrial relations instruments, for example in a New South Wales award,"Minimum Wage". Monthly Labor Review, Vol. 21, No. 6 (December, 1925), pp. 95–98 . which excludes people from the County of Yancowinna. Similar award examples exist in the other states and territories that have been subdivided into counties. The County of Yancowinna is also the only part of New South Wales which is in a different time zone to the rest of the state, as mentioned in the Australian Standard Time Act of 1987. Counties are also used on paperwork for mortgage securities in banks. Parishes and counties are also mentioned in definitions of electoral districts.

Usage

Counties have since gone out of use in Australia, and are rarely used or even known by most of the population today. Part of the reason is that counties are based on the size of land, rather than population, so in a large country where most of the population live in cities on the coast while the countryside has a very low population density, they have little relevance. The counties which contain the capital cities have millions of people, while those in remote areas have a very small population. The County of Adelaide, for instance, has a larger population than all the other counties in South Australia combined. Another reason is that many of the counties' borders follow rivers, having been proclaimed before settlements developed, which means that towns which typically grow up on rivers often find themselves in more than one county. Wangaratta, for instance, is located at the junction of the Ovens and King rivers, and is thus in three counties; Moira, Delatite and Bogong.

Some of the county names live on by being the same name of present-day local government areas, general region names, towns or establishments in the area. For instance, the current Shire of Plantagenet and Shire of Victoria Plains in Western Australia are in the similar area to the County of Plantagenet and County of Victoria, respectively. The modern city of Devonport in Tasmania is located in the County of Devon. Some regions do promote the county name, such as Argyle County,Welcome to the Southern Tablelands of NSW . Retrieved 7 July 2015. while the County of Cadell (roughly in the Murray Shire area) is still the name for a vineyardCadell County Vineyard, Barmah. Retrieved 7 July 2015. and motor lodge in the same area.Hotel Cadell County Motor Lodge . Retrieved 7 July 2015.

By state/territory

Australian Capital Territory

The land which became the Australian Capital Territory was made from land in the New South Wales counties of Murray and Cowley. This includes four former parishes of Canberra, Yarrolumla, Narrabundah and Gigerline in Murray and 15 former parishes in Cowley, while land in parts of other parishes of these counties also became part of the ACT. Murray lies east of the Murrumbidgee River, with Cowley to the west of the river. Parishes and counties are not currently used in ACT titles. Instead, the Districts Act 1966 divided the ACT into 18 districts:ACT map, ACT Planning and Land Authority Canberra Central, Woden Valley, Belconnen, Jerrabomberra, Majura, Tuggeranong, Weston Creek, Gungahlin, Stromlo, Kowen, Hall, Coree, Paddys River, Cotter River, Tennent, Rendezvous Creek, Booth and Mount Clear. The parts of these located in Canberra itself are divided into divisions (i.e. suburbs), sections and blocks. For example, the National Library of Australia is located in Section 27, Blocks 4, 5 and 8, Division of Parkes, District of Canberra Central.ACT Heritage Register Suburbs , ACT Department of Territory and Municipal Services

New South Wales

There are 141 counties and 7,459 parishes within New South Wales. The County of Cumberland, in which Sydney is located, has the largest population. The original Nineteen Counties were the limits of settlement in the early part of the 19th century. Legal documents describe the Lot number, Deposited Plan number, Parish and County. For example, the Sydney Opera House is described as being in Lot 5 in Deposited Plan 775888 at Bennelong Point, Parish of St. James, County of Cumberland, city of Sydney.Australia's World Heritage , Sydney Opera House, Department of Environment, Water, Heritage and the Arts Note that the land administration counties are not the same as the county councils that have been used to administer water and electricity, such as the Goldenfields Water County CouncilGoldenfields Water County Council or Central Tablelands County CouncilCentral Tablelands County Council which do not correspond with a land administration county. Note some county councils have been named after an (approximately) coterminous land administration county, but nonetheless the land administration county and the county council remained legally distinct: Cumberland (1945–63), Northumberland (1948–63) and Rous (1940-pres., with trading name of Rous Water.Lismore Source newsletter, Dec. 2004 Who is Rous Water?)

Northern Territory

There were only five counties in the Northern Territory, which were divided into hundreds. County of Disraeli Malmesbury County Palmerston County (containing Darwin) Roseberry County (containing Pine Creek) Gladstone County (separate from the others, in south-eastern Arnhem Land in the Roper River area)

Darwin is located in the Hundred of Bagot in the Palmerston County: usually only the hundred name, not the county, is mentioned. This is divided into sections. An example of the way locations are described for Darwin is Darwin International Airport listed as being in "Section 3381, Hundred of Bagot from plan LT089/067A" Federal Register of Legislative Instruments In Alice Springs, where there are no hundreds or counties, legal documents give the lot number, town and plan number, for example "Lot 8721 Town of Alice Springs, plan(s) LTO96/016"alicesprings.nt.gov.au Pawa Easment Estinguishment & Creation — Lot 8721

Queensland