The Arecibo Telescope was a spherical reflector radio telescope built into a natural sinkhole at the Arecibo Observatory located near Arecibo, Puerto Rico. A cable-mounted, steerable receiver and several radar transmitters for emitting signals were mounted above the dish. Completed in November 1963, the Arecibo Telescope was the world's largest single-aperture telescope for 53 years, until it was surpassed in July 2016 by the Five-hundred-meter Aperture Spherical Telescope (FAST) in Guizhou, China. Decommissioning the Arecibo Telescope was announced in November 2020, and the telescope collapsed in December 2020.
The Arecibo Telescope was primarily used for research in radio astronomy, atmospheric science, and radar astronomy, as well as for programs that search for extraterrestrial intelligence (SETI). Scientists wanting to use the observatory submitted proposals that were evaluated by independent scientific referees. NASA also used the telescope for near-Earth object detection programs. The observatory, funded primarily by the National Science Foundation (NSF) with partial support from NASA, was managed by Cornell University from its completion in 1963 until 2011, after which it was transferred to a partnership led by SRI International. In 2018, a consortium led by the University of Central Florida assumed operation of the facility.
The telescope's unique and futuristic design led to several appearances in film, gaming and television productions, such as for the climactic fight scene in the James Bond film GoldenEye (1995). It is one of the 116 pictures included in the Voyager Golden Record. It has been listed on the US National Register of Historic Places since 2008. (72 pages, with many historic b&w photos and 18 color photos) The telescope was named an IEEE Milestone in 2001.
The NSF reduced its funding commitment to the observatory from 2006, leading academics to push for additional funding support to continue its programs. The telescope was damaged by Hurricane Maria in 2017 and was affected by earthquakes in 2019 and 2020. Two cable breaks, one in August 2020 and a second in November 2020, threatened the structural integrity of the support structure for the suspended platform and damaged the dish. Due to uncertainty over the remaining strength of the other cables supporting the suspended structure, and the risk of collapse owing to further failures making repairs dangerous, the NSF announced on November 19, 2020, that the telescope would be decommissioned and dismantled, with the LIDAR facility remaining operational. Before it could be decommissioned, several of the remaining support cables suffered a critical failure and the support structure, antenna, and dome assembly all fell into the dish at 7:55 a.m. local time on December 1, 2020, destroying the telescope. The NSF decided in October 2022 that it would not rebuild the telescope or build a similar observatory at the site.
General information
The telescope's main collecting dish had the shape of a spherical cap in diameter with an radius of curvature, and was constructed inside a karst sinkhole. The dish surface was made of 38,778 perforated aluminum panels, each about , supported by a mesh of steel cables. The ground beneath supported shade-tolerant vegetation.
The telescope had three radar transmitters, with effective isotropic radiated powers (EIRPs) of 22 TW (continuous) at 2380 MHz, 3.2 TW (pulse peak) at 430 MHz, and 200 MW at 47 MHz, as well as an ionospheric modification facility operating at 5.1 and 8.175 MHz.
The dish remained stationary, while receivers and transmitters were moved to the proper focal point of the telescope to aim at the desired target. PDF As a spherical mirror, the reflector's focus was along a line rather than at one point. As a result, complex line feeds were implemented to carry out observations, with each line feed covering a narrow frequency band measuring 10–45 MHz. A limited number of line feeds could be used at any one time, limiting the telescope's flexibility. The receiver was on an platform suspended above the dish by 18 main cables running from three reinforced concrete towers (six cables per tower), one high and the other two high, placing their tops at the same elevation. Each main cable was a diameter bundle containing 160 wires, with the bundle painted over and dry air continuously blown through to prevent corrosion due to the humid tropic climate. The platform had a rotating, bow-shaped track long, called the azimuth arm, carrying the receiving antennas and secondary and tertiary reflectors. This allowed the telescope to observe any region of the sky in a forty-degree cone of visibility about the local zenith (between −1 and 38 degrees of declination). Puerto Rico's location near the Northern Tropic allowed the Arecibo telescope to view the planets in the Solar System over the northern half of their orbit. The round trip light time to objects beyond Saturn is longer than the 2.6-hour time that the telescope could track a celestial position, preventing radar observations of more distant objects.
History Design and construction
The origins of the observatory trace to late 1950s efforts to develop anti-ballistic missile (ABM) defenses as part of the newly formed United States Department of Defense (DoD) Advanced Research Projects Agency (ARPA) ABM umbrella-effort, Project Defender. Even at this early stage it was clear that the use of radar decoys would be a serious problem at the long ranges needed to successfully attack a warhead, ranges on the order of .
Among the many Defender projects were several studies based on the concept that a re-entering nuclear warhead would cause unique physical signatures while still in the upper atmosphere. It was known that hot, high-speed objects caused ionization of the atmosphere that reflects radar waves, and it appeared that a warhead's signature would be different enough from decoys that a detector could pick out the warhead directly, or alternately, provide added information that would allow operators to focus a conventional tracking radar on the single return from the warhead.
Although the concept appeared to offer a solution to the tracking problem, there was almost no information on either the physics of re-entry or a strong understanding of the normal composition of the upper layers of the ionosphere. ARPA began to address both simultaneously. To better understand the radar returns from a warhead, several radars were built on Kwajalein Atoll, while Arecibo started with the dual purpose of understanding the ionosphere's F-layer while also producing a general-purpose scientific radio observatory.
On November 6, 1959, Cornell University entered into a contract with ARPA to carry out development studies for a large-scale ionospheric radar probe, exploring how this instrument could also be utilized in radio astronomy and other scientific areas. The observatory was built between mid-1960 and November 1963. William E. Gordon and George Peter of Cornell University oversaw its design for study of the Earth's ionosphere. He was attracted to the sinkholes in the karst regions of Puerto Rico that offered perfect cavities for a very large dish. Originally, a fixed parabolic reflector was envisioned, pointing in a fixed direction with a tower to hold equipment at the focus. This design would have limited its use in other research areas, such as radar astronomy, radio astronomy and atmospheric science, which require the ability to point at different positions in the sky and track those positions for an extended time as the Earth rotates.
Ward Low of the ARPA pointed out this flaw and put Gordon in touch with the Air Force Cambridge Research Laboratory (AFCRL) in Boston, Massachusetts, where one group headed by Phil Blacksmith was working on spherical reflectors and another group was studying the propagation of radio waves in and through the upper atmosphere. Cornell University proposed the project to ARPA in mid-1958 and a contract was signed between the AFCRL and the University in November 1959. Cornell University and Zachary Sears published a request for proposals (RFP) asking for a design to support a feed moving along a spherical surface above the stationary reflector. The RFP suggested a tripod or a tower in the center to support the feed. On the day the project for the design and construction of the antenna was announced at Cornell University, Gordon had also envisioned a tower centered in the reflector to support the feed.
George Doundoulakis, who directed research at the General Bronze Corporation in Garden City, New York, along with Zachary Sears, who directed Internal Design at Digital B & E Corporation, New York, received the RFP from Cornell University for the antenna design and studied the idea of suspending the feed with his brother, Helias Doundoulakis, a civil engineer. George Doundoulakis identified the problem that a tower or tripod would have presented around the center, (the most important area of the reflector), and devised a better design by suspending the feed. He presented his proposal to Cornell University for a doughnut or torus-type truss suspended by four cables from four towers above the reflector, having along its edge a rail track for the azimuthal truss positioning. This second truss, in the form of an arc, or arch, was to be suspended below, which would rotate on the rails through 360 degrees. The arc also had rails on which the unit supporting the feed would move for the feed's elevational positioning. A counterweight would move symmetrically opposite to the feed for stability and, if a hurricane struck, the whole feed could be raised and lowered. Helias Doundoulakis designed the cable suspension system which was finally adopted. The final configuration was substantially the same as in the original drawings by George and Helias Doundoulakis, although with three towers, instead of the four drawn in the patent, which was granted to Helias Doundoulakis by the U.S. Patent office.
The suspended structure was designed by Dr. Thomas C. Kavanagh, Fred Severud, and Dr. Hans Bandel, who were selected after the 1959 RFP issued by Cornell University. A proposal by the General Bronze Corporation was not selected as it did not meet specifications, according to an editorial response by Donald Cooke (Cornell's spokesperson) to Helias Doundoulakis in a newsletter of the Institute of Electrical and Electronics Engineers (IEEE). Cooke stated that Doundoulakis used an incorrect feed/paraxial surface measurement. However, the measurement Cooke used was from Doundoulakis' patent issued in 1966, and not from the 1959 RFP meetings which predated the patent by seven years. Furthermore, proposal measurements presented by George Doundoulakis and Helias Doundoulakis at the RFP meeting on December 10, 1959, were not referenced in Cooke's editorial response. The originators of this proposal subsequently filed a dispute, originally for $1.2 million but was settled for $10,000 because "the defense in a court trial would cost far more than the $10,000 for which the case was settled," and accordingly, on April 11, 1975, Doundoulakis v. U.S. (Case 412-72) had been ruled in plaintiff's favor by the United States Court of Federal Claims, that "(a) a judgment has been entered in favor of the plaintiffs (Helias Doundoulakis, William J. Casey, and Constantine Michalos) against the United States and (b) in consideration of the sum of $10,000 to be paid by the United States Government to the plaintiff, the plaintiffs grants to the United States Government an irrevocable, fully-paid, non-exclusive license under the aforesaid U.S. Patent No. 3, 273, 156 to Cornell University."
The idea of a spherical reflecting mirror with a steerable secondary has since been used in optical telescopes, in particular, the Hobby–Eberly Telescope