Wind power is the use of wind energy to generate useful work. Historically, wind power was used by sails, windmills and windpumps, but today it is mostly used to generate electricity. This article deals only with wind power for electricity generation. Today, wind power is generated almost completely using wind turbines, generally grouped into wind farms and connected to the electrical grid.
In 2025, wind supplied about 2,700 TWh of electricity, which was over 8% of world electricity. With about 100 GW added during 2021, mostly in China and the United States, global installed wind power capacity exceeded 800 GW. 30 countries generated more than a tenth of their electricity from wind power in 2024 and wind generation has nearly tripled since 2015. To help meet the Paris Agreement goals to limit climate change, analysts say it should expand much faster – by over 1% of electricity generation per year.
Wind power is a sustainable, renewable energy source, and has a much smaller impact on the environment than burning fossil fuels. Wind power is variable, so it needs energy storage or other dispatchable generation energy sources to attain a reliable supply of electricity. Land-based (onshore) wind farms have a greater visual impact on the landscape than most other power stations per energy produced. Wind farms sited offshore have less visual impact and have higher capacity factors, although they are generally more expensive. Offshore wind power currently has a share of about 10% of new installations.
Wind power is one of the lowest-cost electricity sources per unit of energy produced. In many locations, new onshore wind farms are cheaper than new coal or gas plants.
Regions in the higher northern and southern latitudes have the highest potential for wind power. In most regions, wind power generation is higher in nighttime, and in winter when solar power output is low. So combinations of wind and solar power are suitable in many countries.
Wind energy resources
Wind is air movement in the Earth's atmosphere. In a unit of time, say 1 second, the volume of air that had passed an area is . If the air density is , the flow rate of this volume of air is , and the power transfer, or energy transfer per second is . Wind power is thus proportional to the third power of the wind speed; the available power increases eightfold when the wind speed doubles. Change of wind speed by a factor of 2.1544 increases the wind power by one order of magnitude (multiply by 10).
The global wind kinetic energy averaged approximately 1.50 MJ/m2 over the period from 1979 to 2010, 1.31 MJ/m2 in the Northern Hemisphere with 1.70 MJ/m2 in the Southern Hemisphere. The atmosphere acts as a thermal engine, absorbing heat at higher temperatures, releasing heat at lower temperatures. The process is responsible for the production of wind kinetic energy at a rate of 2.46 W/m2 thus sustaining the circulation of the atmosphere against friction.
Through wind resource assessment, it is possible to estimate wind power potential globally, by country or region, or for a specific site. The Global Wind Atlas provided by the Technical University of Denmark in partnership with the World Bank provides a global assessment of wind power potential.Mapping the World's Wind Energy Potential World Bank, 28 November 2017.New Global Wind Atlas to be presented at WindEurope Conference Technical University of Denmark, 21 November 2017. Unlike 'static' wind resource atlases which average estimates of wind speed and power density across multiple years, tools such as Renewables.ninja provide time-varying simulations of wind speed and power output from different wind turbine models at an hourly resolution. More detailed, site-specific assessments of wind resource potential can be obtained from specialist commercial providers, and many of the larger wind developers have in-house modeling capabilities.
The total amount of economically extractable power available from the wind is considerably more than present human power use from all sources. The strength of wind varies, and an average value for a given location does not alone indicate the amount of energy a wind turbine could produce there.
To assess prospective wind power sites, a probability distribution function is often fit to the observed wind speed data. Different locations will have different wind speed distributions. The Weibull model closely mirrors the actual distribution of hourly/ten-minute wind speeds at many locations. The Weibull factor is often close to 2 and therefore a Rayleigh distribution can be used as a less accurate, but simpler model.
Wind farms
+ Large onshore wind farms Wind farm Capacity(MW) Country Refs Gansu Wind Farm 7,965 Watts, Jonathan & Huang, Cecily. Winds Of Change Blow Through China As Spending On Renewable Energy Soars , The Guardian, 19 March 2012, revised on 20 March 2012. Retrieved 4 January 2012. Muppandal Wind Farm 1,500 Alta (Oak Creek-Mojave) 1,320 Terra-Gen Press Release , 17 April 2012 Jaisalmer Wind Park 1,064 Started in August 2001, the Jaisalmer based facility crossed 1,000 MW capacity to achieve this milestone . Business-standard.com (11 May 2012). Retrieved on 20 July 2016.
A wind farm is a group of wind turbines in the same location. A large wind farm may consist of several hundred individual wind turbines distributed over an extended area. The land between the turbines may be used for agricultural or other purposes. A wind farm may also be located offshore. Almost all large wind turbines have the same design — a horizontal axis wind turbine having an upwind rotor with 3 blades, attached to a nacelle on top of a tall tubular tower.
In a wind farm, individual turbines are interconnected with a medium voltage (often 34.5 kV) power collection system and communications network. In general, a distance of 7D (7 times the rotor diameter of the wind turbine) is set between each turbine in a fully developed wind farm. At a substation, this medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage electric power transmission system.
Generator characteristics and stability
Most modern turbines use variable speed generators combined with either a partial or full-scale power converter between the turbine generator and the collector system, which generally have more desirable properties for grid interconnection and have low-voltage ride-through capabilities. Modern turbines use either doubly fed electric machines with partial-scale converters or squirrel-cage induction generators or synchronous generators (both permanently and electrically excited) with full-scale converters. Black start is possible and is being further developed for places (such as Iowa) which generate most of their electricity from wind.
Transmission system operators will supply a wind farm developer with a grid code to specify the requirements for interconnection to the transmission grid. This will include the power factor, the constancy of frequency, and the dynamic behaviour of the wind farm turbines during a system fault.
Offshore wind power
Offshore wind power is wind farms in large bodies of water, usually the sea. These installations can use the more frequent and powerful winds that are available in these locations and have less visual impact on the landscape than land-based projects. However, the construction and maintenance costs are considerably higher.
As of November 2021, the Hornsea Wind Farm in the United Kingdom is the largest offshore wind farm in the world at 1,218 MW.
Collection and transmission network Near offshore wind farms may be connected by AC and far offshore by HVDC.
Wind power resources are not always located near areas with a high population density. As transmission lines become longer, the losses associated with power transmission increase, as modes of losses at lower lengths are exacerbated and new modes of losses are no longer negligible as the length is increased; making it harder to transport large loads over large distances.Power System Analysis and Design. Glover, Sarma, Overbye/ 5th Edition
When the transmission capacity does not meet the generation capacity, wind farms are forced to produce below their full potential or stop running altogether, in a process known as curtailment. While this leads to potential renewable generation left untapped, it prevents possible grid overload or risk to reliable service.wind-power-in-maine_2013-08-04.html?pagenum=full Inadequate transmission lines keeping some Maine wind power off the grid – The Portland Press Herald / Maine Sunday Telegram . Pressherald.com (4 August 2013). Retrieved on 20 July 2016.
One of the major challenges to wind power grid integration in some countries is developing new transmission lines to carry power from wind farms, which are often in remote lowly populated areas due to availability of wind, to high load locations where population density is higher. Any existing transmission lines in remote locations may not have been designed for the transport of large amounts of energy.Wald, Matthew (26 August 2008) Wind Energy Bumps Into Power Grid's Limits . New York Times In particular geographic regions, peak wind speeds may not coincide with peak demand for electrical power, whether offshore or onshore. A possible future option may be to interconnect widely dispersed geographic areas with an HVDC super grid.
Wind power capacity and production
In 2024, wind supplied over 2,494 TWh of electricity, which was 8.1% of world electricity.
Growth trends
To help meet the Paris Agreement's goals to limit climate change, analysts say it should expand much faster than it currently is – by over 1% of electricity generation per year. Expansion of wind power is being hindered by fossil fuel subsidies.
The actual amount of electric power that wind can generate is calculated by multiplying the nameplate capacity by the capacity factor, which varies according to equipment and location. Estimates of the capacity factors for wind installations are in the range of 35% to 44%.Rick Tidball and others, "Cost and Performance Assumptions for Modeling Electricity Generation Technologies" , US National Renewable Energy Laboratory, November 2010, p.63.
Capacity factor Since wind speed is not constant, a wind farm's annual energy production is never as much as the sum of the generator nameplate ratings multiplied by the total hours in a year. The ratio of actual productivity in a year to this theoretical maximum is called the capacity factor. Online data is available for some locations, and the capacity factor can be calculated from the yearly output.Massachusetts Maritime Academy — Bourne, Mass This 660 kW wind turbine has a capacity factor of about 19%.Wind Power in Ontario These wind farms have capacity factors of about 28–35%.
Penetration
Wind energy penetration is the fraction of energy produced by wind compared with the total generation. Wind power's share of worldwide electricity usage in 2021 was almost 7%, up from 3.5% in 2015.